In this study, we aim to probe the self-righting behavior of abalone on a substrate based on experiments and mechanistic analyses. A successful self-righting process of abalone is observed, and its critical condition in theory can be given in terms of the rotation angle. Then, according to the moment balance and potential energy minimization, the required tension force of the abalone foot for self-righting is derived with respect to the rotation angle. The experimental result also shows that in many cases the abalone cannot finish this self-righting process. Then, measurements on the tolerant strength of abalone muscle and tolerant adhesion strength of the foot on substrate are both conducted. It is judged that the abalone muscle is strong enough, which can provide enough tension force, and thus, the self-righting mainly depends on the adhesion area of the foot on substrate. These findings cast new light on engineering new types of biomaterials and devices, such as marine equipment and soft robotics.
9 August 2023 in Experimental Thermal and Fluid Science
Floating roof seal integrity is critical for safety and emission control in petroleum storage tanks, yet current detection methods suffer from spark risks and operational inefficiencies. This study proposes an intrinsically safe, non-contact leakage detection system utilizing oil-swellable rubber actuators coupled with a linear magnetic transmission mechanism. By integrating quasi-static experiments with finite element simulations, we investigated the impact of permanent magnet geometry on transmission performance. The results establish a “thickness priority principle”, revealing that increasing magnet thickness nonlinearly enhances shear force and transmission efficiency, whereas increasing width yields diminishing returns due to magnetic flux leakage and added mass. Furthermore, comparative analysis demonstrates that optimized monolithic magnets significantly outperform arrayed configurations, achieving a 471% increase in shear force and a 3.7-fold improvement in transmission efficiency. Based on these findings, a practical detection device was designed and verified against API 650 standards. The proposed solution offers a reliable, electricity-free, and real-time monitoring method for early leakage detection in hazardous tank environments.