Can Zhao

Dr. Can Zhao

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 October 2018 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
Hao WuHao Wu
Hao Wu
YWYangyang Wan
Yangyang Wan
MTMing Tang
Ming Tang
YCYunjin Chen
Yunjin Chen
CZCan Zhao
Can Zhao
DLDeming Liu
Deming Liu
In recent years, many conventional image denoising techniques have been intensively studied to enhance the signal to noise ratio (SNR) of Brillouin optical time domain analyzer (BOTDA), due to their superior denoising performance to one-dimensional methods. However, in the case of low sampling rate, the details of the signal are smoothed out due to less useful information, resulting in a degradation of the spatial resolution. Moreover, these conventional denoising algorithms are quite time-consuming compared to the BOTDA measuring time. To overcome these drawbacks, we employ a feed-forward convolutional neural networks (CNN) based image denoising for BOTDA. A conventional BOTDA system with 15 ns pulse width is implemented to demonstrate the effectiveness of the exploited CNN based denoising method. The actual electrical noise signals of the BOTDA at different sampling rates are collected to synthesize training samples. The CNN model is trained with the noise and simulated BOTDA signals. Experimental results show that SNR improvement of 13.43 dB, 13.57 dB, and 12.9 dB is achieved at a sampling rate of 500 MSa/s, 250 MSa/s, and 125 MSa/s, respectively via the trained CNN denoiser. No spatial resolution distortion can be observed in the denoised BOTDA signals. Besides, the CNN denoiser only takes 0.045 s to process a 151 × 50000 image benefiting from GPU computing. This processing time is negligible compared with the acquisition time of BOTDA, which makes real-time denoising possible.

19 October 2020 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
ZZZhongshu Zhang
Zhongshu Zhang
Hao WuHao Wu
Hao Wu
CZCan Zhao
Can Zhao
MTMing Tang
Ming Tang
Raman-based distributed temperature sensing (RDTS) can achieve temperature measurement of tens of kilometers and is widely used in temperature monitoring of crucial facilities. The accuracy of RDTS is highly determined by the signal-to-noise ratio (SNR) of the acquired spontaneous Raman scattering (SpRS) signals, which is about 60 dB weaker than the pump pulse. Therefore, the performance of single-mode fiber (SMF) based conventional RDTS is poor. To improve its performance, many methods have been proposed, including the use of special optical fibers, pulse coding techniques, and denoising algorithms. However, these methods have their limitations. Here, we propose and experimentally demonstrate a deep one-dimensional denoising convolutional neural network (1DDCNN) to enhance the performance of RDTS. A simplified RDTS model is built to train and optimize the 1DDCNN. To verify the performance of the 1DDCNN on actual data, we experimentally measure the SpRS data of a 10-km SMF with an average time of 1 s and a spatial resolution of 3 m. The well-trained 1DDCNN reduces the temperature uncertainty from 6.4 °C to 0.7 °C with high fidelity. As a comparison, the commonly used wavelet denoising algorithm can only reduce it to 3.7 °C. Besides, the 1DDCNN does not require manual parameter adjustment and is not affected by the sampling rate, giving it significant advantages in practical applications compared with conventional denoising algorithms. Moreover, we believe that the proposed 1DDCNN can be applied to other distributed optical fiber sensing systems by fine-tuning the network with appropriate training data.

10 March 2022 in Sensors
Verified
Journal Article
Open access
PDF file
Hao WuHao Wu
Hao Wu
DHDu Haoze
Du Haoze
CZCan Zhao
Can Zhao
MTMing Tang
Ming Tang
Raman distributed optical fiber temperature sensing (RDTS) has been extensively studied for decades because it enables accurate temperature measurements over long distances. The signal-to-noise ratio (SNR) is the main factor limiting the sensing distance and temperature accuracy of RDTS. We manufacture a low water peak optical fiber (LWPF) with low transmission loss to improve the SNR for long-distance application. Additionally, an optimized denoising neural network algorithm is developed to reduce noise and improve temperature accuracy. Finally, a maximum temperature uncertainty of 1.77 °C is achieved over a 24 km LWPF with a 1 m spatial resolution and a 1 s averaging time.

12 September 2023 in Optics Express
Verified
Journal Article
Closed access
ZHZihe Hu
Zihe Hu
YCYizhao Chen
Yizhao Chen
HJHexun Jiang
Hexun Jiang
MZMing-Ming Zhang
Ming-Ming Zhang
JCJunda Chen
Junda Chen
MTMing Tang
Ming Tang
Enabling communication networks with sensing functionality has attracted significant interest lately. The digital subcarrier multiplexing (DSCM) technology is widely promoted in short-reach scenarios for its inherent flexibility of fine-tuning the spectrum. Its compatibility with large-scale as-deployed coherent architectures makes it particularly suited for cost-sensitive integrated sensing and communication applications. In this paper, we propose a scheme of spectrally integrating the digital linear frequency modulated sensing signal into DSCM signals to achieve simultaneous sensing and communication through shared transmitter. Consequently, this cost-effective scheme has been demonstrated to achieve 100-Gb/s dual-polarization quadrature phase-shift keying (DP-QPSK) and 200-Gb/s dual-polarization 16-ary quadrature amplitude modulation (DP-16QAM) transmission with a distributed acoustic sensing sensitivity of 69 pε/Hz and 88 pε/Hz respectively, at a spatial resolution of 4 m.

25 December 2020 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
LSLi Shen
Li Shen
ZZZhiyong Zhao
Zhiyong Zhao
CZCan Zhao
Can Zhao
Hao WuHao Wu
Hao Wu
CLChao Lu
Chao Lu
MTMing Tang
Ming Tang
Spatial resolution improvement from an acquired measurement using long pulse is developed for Brillouin optical time domain analysis (BOTDA) systems based on the total variation deconvolution algorithm. The frequency dependency of Brillouin gain temporal envelope is investigated by simulation, and its impact on the recovered results of deconvolution algorithm is thoroughly analyzed. To implement a reliable deconvolution process, differential pulse-width pair (DPP) technique is utilized to effectively eliminate the systematic Brillouin frequency shift (BFS) distortion stemming from the frequency dependency of temporal envelope. The width of the pulse pairs should be larger than 40 ns as is analyzed theoretically and verified experimentally. It has been demonstrated that the proposed method can realize flexible adjustment of spatial resolution with enhanced signal-to-noise ratio (SNR) from an established measurement with long pump pulse. In the experiment, the spatial resolution is increased to 0.5 m and 1 m with high measurement accuracy by using the deconvolution algorithm from the measurement of 60/40 ns DPP signals. Compared with the raw DPP results with the same spatial resolution, 7.9 dB and 5.9 dB SNR improvements are obtained for 0.5 m and 1 m spatial resolution respectively, thanks to the denoising capability of the total variation deconvolution algorithm. The impact of sampling rate on the recovery results is also studied. The proposed sensing system allows for distortion-free Brillouin distributed sensing with higher spatial resolution and enhanced SNR from the conventional DPP setup with long pulse pairs.

29 May 2024 in Optics Letters
Verified
Journal Article
Closed access
ZHZihe Hu
Zihe Hu
MZMing-Ming Zhang
Ming-Ming Zhang
YLYuqi Li
Yuqi Li
JCJunda Chen
Junda Chen
WLWeihao Li
Weihao Li
MTMing Tang
Ming Tang
To monitor the health of the fiber network and its ambient environment in densely populated access/metro network areas, in this Letter, an endogenous distributed acoustic sensing (DAS) has been proposed and achieved in a coherent digital subcarrier multiplexing (DSCM) system. Rather than specially allocating a sensing probe in general integrated communication and sensing schemes, the fractional Fourier transformed (FrFT) training sequence (TS) designated for time/frequency synchronization in DSCM coherent communications has been repurposed for sensing. While achieving excellent synchronization performance of communication, the FrFT-based TS can also be concurrently utilized to perform distributed vibration sensing. Experimental results demonstrate that the FrFT-based timing/frequency synchronization sequence is repurposed to achieve a DAS sensitivity of 70 pε/Hz at a spatial resolution of 5 m, along with 100-Gb/s 16 quadrature amplitude modulation (QAM) DSCM transmission, without a loss of spectral efficiency.