This study utilized experimental methods involving high-speed cameras to observe the interaction between cavitation bubbles, generated by a low-voltage electric spark device, and particles near a rigid wall. The dynamic characteristics of the particles were analyzed under varying conditions, including different cavitation bubble sizes, particle sizes, and distances between the cavitation bubble and the wall. Two characteristic parameters were introduced: χ for the particle and cavitation bubble sizes, and λ for the cavitation bubble wall distance. Qualitative distinctions were made among types of particle–bubble interactions, and force analysis was conducted under conditions where χ exceeded the threshold χt. The findings reveal that when χ < χt, particle motion is primarily influenced by the jet effects produced by the cavitation bubble. Conversely, when χ > χt, particle motion is dominated by the radiation forces exerted by the cavitation bubble. Under jet-dominated conditions, particle trajectories were observed to be erratic and unpredictable. For cases where λ < 0, the high-speed jet directly impacts the particle. Conversely, for λ > 0, the jet's velocity decays rapidly upon reaching the particle. In scenarios dominated by radiation forces, the cavitation bubble drew particles away from the wall, followed by their free fall back toward it. The influence of gravity, buoyancy, bubble radiation force, fluid resistance, and virtual mass force on particles was studied when radiation forces prevailed. The acceleration formula for particles was derived through the application of the bubble dynamics equation and was refined based on experimental observations.
This study investigates the dynamic characteristics of suspended particles in a free field under the influence of a single cavitation bubble. The phenomenon of suspended particles being influenced by cavitation bubbles of comparable size reflects the dynamic characteristics of particles, a common occurrence in both hydraulic machinery and biopharmaceutical fields. A high-speed camera captures the process of a single cavitation bubble interacting with suspended particles. Combined with three-dimensional numerical simulations, the motion states of suspended particles as the cavitation bubble expands and contracts are analyzed. Observations reveal that at various initial distances between suspended particles and the cavitation bubble, suspended particle motion is consistently influenced by the expansion and contraction of the same cavitation bubble during the initial four processes. The particle motion direction is parallel to the propagation direction of the radiation force produced during the expansion and collapse of the cavitation bubble, consistent with the characteristics of motion under longitudinal wave effects. The initial distance between suspended particles and the cavitation bubble dictates the ultimate displacement direction of suspended particles, with the influence of the cavitation bubble on suspended particle velocity weakening as their distance increases. Under conditions where particle size closely matches that of the bubble, the jet produced by the cavitation bubble does not significantly accelerate particles, and the influence of the jet on suspended particle motion states could be disregarded. The investigation reveals that the suspended particles are primarily influenced by the radiation force, drag force, and virtual mass force exerted by the cavitation bubble.
In developing and transporting significant oil fields in deep-sea environments, multiphase pumps are considered crucial energy conversion equipment. Ensuring their safe, efficient, and stable operation is currently a primary focus of research. The intermittent aggregation of the gas phase at the trailing edge flap of the impeller blades in multiphase pumps can lead to periodic and significant fluctuations in flow rate and outlet pressure, posing a threat to the overall operational safety of the pump system. Based on aerodynamic principles, this paper presents the design of a separate trailing edge flap for the impeller blades. The inner nodal method is applied to determine the design scheme of the trailing edge flap for the multiphase pump. A numerical approach is employed to analyze the impact of the flap deflection angle on the internal flow characteristics to provide theoretical guidance for the structural optimization of multiphase pumps. The results indicate that the influence of the deflection angle on the pump efficiency is complex and affected by a critical angle value. When the deflection angle is below the critical value, the trailing edge flap can effectively reduce the formation of energy dissipation vortices and radial pressure gradients within the impeller channel, enabling a significant improvement in the gas-phase aggregation phenomenon caused by gas–liquid separation. However, additional energy losses occur at the connection between the trailing edge flap and the main blade body for deflection angles exceeding the critical value. When the trailing edge flap length is 0.25 l and the deflection angle is 5°, the efficiency is improved by 3.4% compared to the original model. Consequently, the pressurization capacity of the pump is compromised. In the design and application of trailing edge flaps, a careful balance between various factors is required to ensure both the stability and high efficiency of the pump system.
Cavitation and cavitation erosion are complex hydrodynamic behaviors that significantly influence the stability and reliability of pumping units in aerospace and navigation power systems, hydraulic engineering, and other fields. Studies on cavitation have primarily and heavily focused on the collapse of multiple cavitation bubbles; understanding the movement of multiple cavitation bubbles is important for cavitation research. In this study, the collapse process of near-wall double-cavitation bubbles was numerically simulated and experimentally verified, and the evolution of the near-wall double-cavitation bubble collapse was investigated. Two different distances were altered in the study. The distance between the double-cavitation bubble and the distance between the cavitation bubbles and the wall, the effects of dimensionless parameters, such as the near-wall coefficient and the cavitation bubble spacing coefficient, the collapse time, jet angle, and impact load on the wall can be determined. It was found that the collapse time of the double-cavitation bubbles decreased in a negative exponential distribution with an increase in the cavitation bubble spacing coefficient, along with decreases in a negative exponential distribution with an increase in the near-wall coefficient. The jet angle increased in a negative exponential distribution with an increase in the cavitation bubble spacing coefficient and decreased in a negative exponential distribution with an increase in the near-wall coefficient. The impact load on the wall initially increased and then decreased in the form of a quadratic function, with an increase observed in the cavitation bubble spacing coefficient. With an increase in the near-wall coefficient, the impact load on the wall first decreased, then increased, and finally decreased in the form of a cubic function.
This study presents a new synergy model that incorporates the accelerated motion of particles resulting from bubble collapse. The model uses the Erosion/Corrosion Research Center erosion model to predict the combined effect of cavitation and particle erosion on wall surfaces. The results show that, compared with the conventional erosion model, the synergy model reduces the error in the erosion mass loss by up to 24.60%. The significant improvement in prediction accuracy confirms the effectiveness of the synergy model. The severity of sample erosion is positively correlated with the cavitation-inducer angle. The synergy effect leads to an increase in the extent and severity of erosion. Smaller particles demonstrate a more pronounced synergy effect, resulting in significantly accelerated motion and a highly concentrated particle distribution. High erosion rates are associated with high-speed impacts and small-angle impact zones, primarily caused by high-speed cutting erosion. This study presents a novel prediction method for exploring the synergy effect of cavitation and particles on wall erosion and investigates the motion characteristics of particles under this effect.
The dynamic model of cavitation bubbles serves as the foundation for the study of all cavitation phenomena. Solving the cavitation bubble dynamics equation can better elucidate the physical principles of bubble dynamics, assisting with the design of hydraulic machinery and fluid control. This paper employs a fourth-order explicit Runge–Kutta numerical method to solve the translational Keller–Miksis model for cavitation bubbles. It analyzes the collapse time, velocity, as well as the motion and force characteristics of bubbles under different wall distances γ values. The results indicate that as the distance between the cavitation bubble and the wall decreases, the cavitation bubble collapse time increases, the displacement of the center of mass and the amplitude of translational velocity of the cavitation bubble increase, and the minimum radius of the cavitation bubble gradually decreases linearly. During the stage when the cavitation bubble collapses to its minimum radius, the Bjerknes force and resistance experienced by the bubble also increase as the distance to the wall decreases. Especially in the cases where γ = 1.3 and 1.5, during the rebound stage of the bubble, the Bjerknes force and resistance increase, causing the bubble to move away from the wall. Meanwhile, this study proposes a radiation pressure coefficient to characterize the radial vibration behavior of cavitation bubbles when analyzing the radiation sound pressure. It is found that the wall distance has a relatively minor effect on the radiation pressure coefficient, providing an important basis for future research on the effects of different scale bubbles and multiple bubbles. The overall idea of this paper is to numerically solve the bubble dynamics equation, explore the characteristics of bubble dynamics, and elucidate the specific manifestations of physical quantities that affect bubble motion. This provides theoretical references for further engineering applications and flow analysis.