Wangxu Li

Dr. Wangxu Li


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 October 2023 in Processes
Verified
Journal Article
Open access
PDF file
JZJuping Zhou
Juping Zhou
WHWei Han
Wei Han
RLRennian Li
Rennian Li
XMXiaoning Ma
Xiaoning Ma
HWHaojie Wang
Haojie Wang
WLWangxu Li
Wangxu Li
In developing and transporting significant oil fields in deep-sea environments, multiphase pumps are considered crucial energy conversion equipment. Ensuring their safe, efficient, and stable operation is currently a primary focus of research. The intermittent aggregation of the gas phase at the trailing edge flap of the impeller blades in multiphase pumps can lead to periodic and significant fluctuations in flow rate and outlet pressure, posing a threat to the overall operational safety of the pump system. Based on aerodynamic principles, this paper presents the design of a separate trailing edge flap for the impeller blades. The inner nodal method is applied to determine the design scheme of the trailing edge flap for the multiphase pump. A numerical approach is employed to analyze the impact of the flap deflection angle on the internal flow characteristics to provide theoretical guidance for the structural optimization of multiphase pumps. The results indicate that the influence of the deflection angle on the pump efficiency is complex and affected by a critical angle value. When the deflection angle is below the critical value, the trailing edge flap can effectively reduce the formation of energy dissipation vortices and radial pressure gradients within the impeller channel, enabling a significant improvement in the gas-phase aggregation phenomenon caused by gas–liquid separation. However, additional energy losses occur at the connection between the trailing edge flap and the main blade body for deflection angles exceeding the critical value. When the trailing edge flap length is 0.25 l and the deflection angle is 5°, the efficiency is improved by 3.4% compared to the original model. Consequently, the pressurization capacity of the pump is compromised. In the design and application of trailing edge flaps, a careful balance between various factors is required to ensure both the stability and high efficiency of the pump system.

14 June 2023 in Processes
Verified
Journal Article
Open access
PDF file
WHWei Han
Wei Han
ZXZitian Xu
Zitian Xu
YHYingjian Hao
Yingjian Hao
JRJiale Ren
Jiale Ren
WLWangxu Li
Wangxu Li
ZGZhenye Gu
Zhenye Gu
Cavitation and cavitation erosion are complex hydrodynamic behaviors that significantly influence the stability and reliability of pumping units in aerospace and navigation power systems, hydraulic engineering, and other fields. Studies on cavitation have primarily and heavily focused on the collapse of multiple cavitation bubbles; understanding the movement of multiple cavitation bubbles is important for cavitation research. In this study, the collapse process of near-wall double-cavitation bubbles was numerically simulated and experimentally verified, and the evolution of the near-wall double-cavitation bubble collapse was investigated. Two different distances were altered in the study. The distance between the double-cavitation bubble and the distance between the cavitation bubbles and the wall, the effects of dimensionless parameters, such as the near-wall coefficient and the cavitation bubble spacing coefficient, the collapse time, jet angle, and impact load on the wall can be determined. It was found that the collapse time of the double-cavitation bubbles decreased in a negative exponential distribution with an increase in the cavitation bubble spacing coefficient, along with decreases in a negative exponential distribution with an increase in the near-wall coefficient. The jet angle increased in a negative exponential distribution with an increase in the cavitation bubble spacing coefficient and decreased in a negative exponential distribution with an increase in the near-wall coefficient. The impact load on the wall initially increased and then decreased in the form of a quadratic function, with an increase observed in the cavitation bubble spacing coefficient. With an increase in the near-wall coefficient, the impact load on the wall first decreased, then increased, and finally decreased in the form of a cubic function.

12 July 2023 in Processes
Verified
Journal Article
Open access
PDF file
FZFeng Zhou
Feng Zhou
QLqifei li
qifei li
WLWangxu Li
Wangxu Li
In order to study the evolution principle of the coherent structure in the low flow rate runaway condition, the pump turbine of a certain pumped storage power plant was employed. The transient dynamic stress of the runner was numerically simulated and examined in this study in order to analyze the coherent structure of the vortex and the stability of the grid connection during the transition process. Based on the realizable k-ε turbulent model, the unsteady flow of the whole pump turbine channels was calculated. The results show that the flow in the runner channels presents with a turbulence state, and with many different scales vortices. These vortex structures are mainly distributed in the inlet region of the blade, the area of the blade trailing edge and the middle section of the runner channels. These vortex structures affect the distribution of the blade pressure load. Moreover, the vortex structure at the inlet of the runner depends on the change in the attack angle. In the flow region formed at the outlet of the blade near the suction surface and the runner cone, the blade has a limited effect on the fluid; thus, the vortex structure depends on the Coriolis force and the centrifugal force joint action. The evolution of these vortex structures will have a greater impact on the grid connection of the power station. During the operation of the power station, it is necessary to reduce the time of transitional conditions so that the power station can operate efficiently.

21 September 2024 in Processes
Verified
Journal Article
Open access
PDF file
ZLzhenggui Li
zhenggui Li
ZWZiyue Wang
Ziyue Wang
CSChangrong Shen
Changrong Shen
WLWangxu Li
Wangxu Li
YJYanxiong Jiao
Yanxiong Jiao
YLYuanyuan Li
Yuanyuan Li
This article focuses on the safety valve of pressure vessels, and a new ferrofluid sealing device for pressure vessel safety valves is developed based on a special magnetic circuit. A combined method of numerical calculation and experimental analysis is used to study the relationship between seal clearance, number of seals, pole slot width, pole tooth height, pole tooth width, and the sealing pressure of the ferrofluid sealing device. The research results show that seal clearance and pole tooth width have a significant impact on the sealing performance, and as the dimensions increase, the sealing pressure decreases. As the number of seals, pole tooth height, and slot width increase, the sealing performance initially improves and then decreases. This phenomenon is attributed to the increase in magnetic reluctance in the magnetic circuit. In experimental studies, when the excitation current of the electromagnet is 240 mA and the coil turns number 30, the sealing capacity is 61.22 kPa. When the excitation current is 200 mA and the coil turns number 80, the sealing capacity is 168.24 kPa. The experiments demonstrate the compensating ability of magnetic fluid seals in combination with safety valve seals, confirming that combined seals have higher reliability compared to conventional mechanical seals.

19 February 2025 in Processes
Verified
Journal Article
Open access
PDF file
THTianding Han
Tianding Han
QLQifei Li
Qifei Li
LSLin Shang
Lin Shang
XCXiangyu Chen
Xiangyu Chen
FZFeng Zhou
Feng Zhou
WLWangxu Li
Wangxu Li
Biomass clean energy is widely used as an alternative to fossil fuels due to its advantages of low carbon emissions, cleanliness, and renewability. Biomass fuel exchangers are important equipment for heat exchange between air and exhaust gasses after biomass combustion, and the air flow rate and structural characteristics of the exchanger have a significant impact on the heat transfer performance. In order to investigate the effect of Reynolds number on the heat transfer performance of the exchanger when air flows through, a serpentine tube heat exchange test bench was constructed, and numerical calculations were performed using the Realizable k-ε turbulence model for the entire channel. By changing the diameter and pitch of the serpentine tube, the effects of geometric parameters on the heat transfer performance were studied, and the flow characteristics of exhaust gasses and air inside the exchanger under various operating conditions were deduced. Subsequently, experimental validation was conducted by referring to the boundary conditions of numerical calculations, obtaining corresponding test data, and comparing the numerical and experimental results, showing that the errors in various physical quantities were within 5%. Through comprehensive analysis of the data, it was found that when the serpentine tube diameter is 80 mm and pitch is 300 mm, the Nusselt number (Nu) increased most significantly with Reynolds number (Re) by 25.17%, indicating the best heat transfer performance. Additionally, reducing tube diameter, increasing serpentine tube pitch, enlarging air-inlet flow velocity can enhance Re, increase fluid disturbance, and improve convective heat transfer intensity, thereby increasing Nu and strengthening the heat transfer performance of the serpentine tube exchanger.

29 May 2025 in Actuators
Verified
Journal Article
Open access
PDF file
FCFang Chen
Fang Chen
QGQinkui Guo
Qinkui Guo
YLYuchen Liu
Yuchen Liu
YDYuan Dong
Yuan Dong
YXYangjie Xiao
Yangjie Xiao
WLWangxu Li
Wangxu Li
To effectively suppress spindle vibrations in rotating machinery, magnetorheological (MR) dampers, as an ideal vibration control device, have attracted attention. To enhance the vibration damping effect, in the paper, a MR damper vibration with a multi-layered permanent magnet as the magnetic source is designed, and the self-made magnetorheological fluid is used as the damping medium. The mechanical properties of the MR damper were obtained through testing and calculation. On this base, both simulation and experimental methods are used to demonstrate the effectiveness of the multi-layered permanent-magnet MR damper. The simulation results show that the critical speed increases greatly for the first four modes. The experimental results show that the Y-direction displacement decreases greatly, especially at 1800 rpm and at 3400 rpm, after applying the MR damper. The vibration displacement at 1× frequency shows a 69.74% reduction at 2600 rpm and a 65.69% reduction at 3200 rpm in the Y-direction after applying the MR damper. The effectiveness of the multi-layered permanent magnet MR damper in rotor vibration suppression was confirmed.