Department of Electrical and Computer Engineering, Faculty of Engineering and Architectural Science (FEAS) Ryerson University, 350 Victoria Street, Toronto, ON M5B 2K3, Canada
Prof. Dr. Fei Yuan
Department of Electrical and Computer Engineering, Faculty of Engineering and Architectural Science (FEAS) Ryerson University, 350 Victoria Street, Toronto, ON M5B 2K3, Canada
This study provides a comprehensive review of decision feedback equalisation (DFE) for multi‐giga‐bit‐per‐second (Gbps) data links. The state‐of‐the‐art of DFE for multi‐Gbps serial links reported in the past decade are compiled and presented. The imperfection of wire channels, in particular, finite bandwidth, reflection and cross‐talk and their impact on data transmission are investigated. The fundamentals of both near‐end and far‐end channel equalisation to combat the effect of the imperfection of wire channels at high frequencies are explored. A detailed examination of the principle, configuration, operation and limitation of DFE is followed. Design challenges encountered in design of DFE for multi‐Gbps data links including timing constraints, sampling, error propagation, arithmetic operation, highly dispersive channels, power consumption and techniques and circuit implementations that address these challenges are studied. The need for adaptive DFE and the principles of adaptive DFE are investigated. Finally, the performance of various adaptive DFEs is examined and their pros and cons are compared.
16 September 2009 in Analog Integrated Circuits and Signal Processing
This paper presents an all-digital 1st-order 1-bit ΔΣ time-to-digital converter (TDC) using a time-mode signal processing approach. Time integration is performed using a bi-directional gated delay line. The nonlinearity and timing errors of the time integrator are analyzed. The impact of feedback time on the performance of the TDC is analyzed. A design methodology effective in minimizing the impact of process uncertainty is developed. The TDC is designed in a TSMC 130 nm 1.2 V CMOS technology and analyzed using Spectre from Cadence Design Systems with BSIM4 device models. Simulation results show the TDC offers SNDR of 50.0 dB and ENOB of 8.0 over 731 kHz bandwidth at 33 MHz sampling frequency while consuming 175 μW. The FOM of the TDC is 0.47 pJ/conv.
1 November 2021 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper investigates the metastability of true single-phase clock (TSPC) D flip flops (DFFs) and its impact on the resolution of Vernier time-to-digital converters (TDCs). The mechanisms of the metastability of TSPC DFFs are investigated and the analytical expressions of setup time and hold time are obtained. A shunt capacitor technique capable of reducing setup time and hold time to zero with no power and delay penalty is proposed. The impact of PVT (process, voltage, temperature) on the effectiveness of the proposed technique is quantified using simulation. Vernier TDCs, both right-shifting and left-shifting, with untuned and tuned DFFs are designed in TSMC 130 nm 1.2 V CMOS technology and analyzed using Spectre with BSIM3V3 device models. Simulation results demonstrate TDCs with tuned DFFs enjoy zero conversion error while the right-shifting and left-shifting TDCs with untuned DFFs have 1-bit and 5-bit conversion errors or 11% and 56% error rates, respectively.