Marine renewable energy (MRE) development will be crucial to achieve worldwide energy decarbonization. In Europe, 1 GW and 40 GW of ocean energy are set to be developed by 2030 and 2050, respectively. Support is essential if wave and tidal stream arrays are to become more economically viable than they currently are. Four recently developed open-access software tools are used in this study to investigate the critical and expensive elements of potential demonstration and commercial scale tidal projects. The tools have been designed and built to assist users with array configurations, foundation and mooring (F&M) design, operation and maintenance (O&M) strategies, and techno-economic analysis. Demonstration of their use is performed in this study to model scenarios for 2 MW, 10 MW, 40 MW, and 100 MW tidal energy projects employing typical 500 kW fixed and 2 MW floating turbines at the West Anglesey Tidal Demonstration Zone in the Irish Sea. The following metrics are examined: the power output and wake losses of staggered and line configurations; the design and costs of simple gravity-based foundations, gravity-based anchors and the four-chain catenary mooring system of a single turbine; the mean O&M costs and farm availability over the project life; and the breakdown of levelized cost of energy (LCoE) for all eight scenarios to ultimately reveal minimum values of 173 EUR/MWh and 147 EUR/MWh for fixed and floating tidal energy technologies, respectively. The thorough analysis facilitated within these four tools to forecast realistic situations in a specific location can help users design a tidal energy project for an area with considerable potential for commercial scale projects, and thus assist the ocean energy community in promoting and nurturing the sector in the years and decades ahead.
1 October 2025 in Journal of Physics: Conference Series
Floating Offshore Wind (FOW) generation in Ireland could deliver up to 37 gigawatts of energy by 2050. A critical enabler for this will be wet storage, the temporary nearshore storage of FOW units in suitable areas prior to installation. Wet storage is expected to be particularly imperative in Ireland due to the harsh wave climate, resulting in narrower installation weather windows, off the Irish coast. This study is addressing the major unknowns surrounding wet storage, focusing on the technical challenges and identification of potential sites. The sites analysis was performed using advanced GIS software considering a range of geospatial criteria representing the various constraints restrictions and opportunities at play. A validation of the wave data used has been performed to assess accuracy. Furthermore, wave and tidal model downscaling has also been performed in order to adequately represent the oceanographic conditions inside some of the more enclosed areas/ports in the study area. Validation results have indicated generally good agreement between modelled and in-situ wave data, despite the tendency for the model to underestimate extreme values (i.e. during storm events). The results of the site suitability analysis reveal extensive areas of potential for wet storage within the Shannon Estuary and Bantry Bay on the southwest coast in addition to some limited potential at Belfast Lough in the north.