Nowadays, additive manufacturing of metallic materials is most often carried out using expensive and complex tools that leave the user with limited control and no possibility of modification. In order to make the printing of metal parts more accessible to small structures but also better suited for academic research, the use of a mixture of thermoplastic polymer and metal powder is a good solution as many granular feedstocks already exist for Metal Injection Molding applications. To perform the shaping process, the Fused Granular Fabrication 3D printing technology is set up by diverting the use of a feedstock in the form of pellets that are directly inserted into the print head. This solution, which is less costly, is implemented here by modifying a mid-range printer, the Tool Changer from E3D, and by making the hardware and software adaptations to mount a compact granulates extruder on it, which is also available on the market. The polymer portion present in the green part can then be removed in order to perform the heat treatments that will densify the powder by sintering and give a fully metallic dense object.
This paper presents a bridge between topology optimization and additive manufacturing. On the one hand, it presents an algorithm that considers the design variables as binary and then solves the problem by binary linear programming to optimize a ferromagnetic core. On the other hand, a 3D printing process is developed to manufacture the shapes obtained by topology optimization. Finally, these magnetic parts are characterized through electrical measurements.
Additive manufacturing offers flexibility in terms of shapes, and currently enables the printing of a variety of materials for electrical engineering. This article presents the fabrication and magnetic characterization of a MnZn soft ferrite toroidal core produced by additive manufacturing. The parts are manufactured using the PIM-like process for which the 3D printing step is performed using powder filled polymer pellets. After debinding and sintering steps, a dense core with magnetic performance comparable to that of a conventional ferrite is obtained. The process is an original one for the production of soft ferrite parts. Microstructural and magnetic characterizations were carried out to obtain its grain size and main magnetic properties, i.e. its hysteresis loops and associated power losses as a function of induction and frequency. The evolution of the temperature behavior of the ferrite is also presented.
8 September 2026 in Progress in Additive Manufacturing
Nickel–zinc (Ni–Zn) ferrites are widely used in the fabrication of high-frequency inductors operating above 1 MHz, particularly for filtering applications in power electronics. Ferrite manufacturers can benefit from advancements in additive manufacturing (AM), enabling the production of customised ferrite cores with complex geometries. In this work, an innovating AM process of Ni–Zn ferrites has been set up through a fused filament fabrication (FFF) printing stage from ferrite powder synthesis to sintered component. This proof of concept has been validated by a two-factor sintering design of experiments (temperature, time) and through bulk, microstructural and magnetic characterisations. The results indicate that the proposed process has the potential to achieve densifications of approximately 90% and real permeability values (μ′) in the range of 80 to 130, indicating performance levels comparable to those of conventional manufacturing techniques. The capabilities of the proposed process have been demonstrated by the printing of a ferrite-based 3D Benchy benchmark, highlighting its suitability for advanced component design in power electronics.