Jiao Huang

Jiao Huang


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 January 2026 in Metals
Verified
Journal Article
Open access
PDF file
JHJiao Huang
Jiao Huang
JCJidan Chen
Jidan Chen
JPJinting Pan
Jinting Pan
SGShihao Gao
Shihao Gao
LFLifeng Fan
Lifeng Fan
The Cu-Cr-Zr alloy is regarded as an optimal material for high-end electronic information industries owing to its high electrical strength, high conductivity, and outstanding softening resistance. Nevertheless, the impacts of Cr content and microstructure evolution on performance enhancement during the processing stage remain unclear. In this research, Cu-xCr-0.1Zr alloys with varying Cr contents were fabricated via the thermo-mechanical approach. The microstructure evolution, as well as the mechanical and electrical properties before and after aging were investigated. It was discovered that Cr can mitigate the grain deformation degree of the copper alloy during cold rolling, notably augment the proportion of large-angle grain boundaries, and diminish the dislocation density induced by plastic deformation. As the Cr content increases, the conductivity of the sample declines from 86% IACS (0Cr) to 34.1% IACS (1.8Cr), and the tensile strength rises from 435 MPa (0Cr) to 542 MPa (1.8Cr) after cold rolling; the conductivity decreases from 89.4% IACS (0Cr) to 77.3% IACS (1.8Cr), and the tensile strength increases from 278 MPa to 607 MPa (1.0Cr). Based on the comprehensive outcomes, the aged 1.0Cr sample, with a tensile strength of 607 MPa and a conductivity of 80.9% IACS, satisfies the performance requirements of high-strength and high-conductivity copper alloys.

28 October 2023 in Materials
Verified
Journal Article
Open access
PDF file
LFLifeng Fan
Lifeng Fan
YYYulong Yang
Yulong Yang
JHJiao Huang
Jiao Huang
EYErbin Yue
Erbin Yue
WHWenhao Hu
Wenhao Hu
JGJun Gao
Jun Gao
Studies about the pre-stretching effect on the mechanical behavior of cold-rolled 5%Mn medium manganese steel have adopted optical microscopy, scanning electron microscopy, transmission electron microscopy and X-ray diffraction techniques. Results showed that pre-stretching would change the ferrite morphology from massive and lath-like to strip-like. With the pre-stretching increasing from 0% to 14%, the dislocation density and yield strength both grew gradually, which corresponded to growth from 6.49 × 1014 m−2 to 7.98 × 1014 m−2 and growth from 765 MPa to 1109 MPa, respectively. Meanwhile, the austenite volume fraction, elongation and product of strength and elongation were all reduced with the pre-stretch increase. The stabilized retained austenite with pre-stretch delayed the occurrence of the TRIP effect and improved the work hardening rate. As a result, the Lüders band disappeared at 2% pre-stretch and the PLC band vanished from the stress–strain curve at 14% pre-stretch.