Results of an experimental study are presented and discussed for pulsed vacuum drying (PVD), infrared-assisted hot air-drying (IR-HAD), and hot air-drying (HAD) on drying kinetics, physicochemical properties (surface color, nonenzyme browning index, red pigments, rehydration ratio, water holding capacity, and ascorbic acid), antioxidant capacity (ferric reducing antioxidant power and 2,2-diphenyl-1-picrylhydrazyl radical scavenging capacity), and microstructure of red pepper. As expected, the drying time decreased with an increase in drying air temperature, IR-HAD needed the shortest drying time, followed by HAD and PVD. The effective moisture diffusivity (D_eff) of red pepper under PVD, HAD, and IR-HAD was computed to be in the range 1.33–5.83 × 10⁻¹⁰, 1.38–6.87 × 10⁻¹⁰, and 1.75–8.97 × 10⁻¹⁰ m²/s, respectively. PVD provided superior physicochemical properties of dried red pepper compared to samples dried by HAD and IR-HAD. In detail, PVD yielded higher rehydration ratio, water holding capacity, red pigment and ascorbic acid content, brighter color, lower nonenzyme browning index, and comparable antioxidant capacity compared to samples dried by HAD and IR-HAD at the same drying temperature. Furthermore, PVD promoted the formation of a more porous structure, while HAD and IR-HAD yielded less porous structure. The current findings indicate that PVD drying has the potential to produce high-quality dried red pepper on commercial scale.

With a high moisture content, fresh peppers are perishable and rot easily. Drying is essential for shelf-life extension. The natural thin wax layer on the pepper surface hinders moisture transfer. Traditionally, chemical dipping or mechanical pricking is used to remove this wax layer. However, in chemical dipping, chemical residues can trigger food-safety issues, while the low efficiency of mechanical pricking hinders its industrial application. Feasible pretreatment methods are advantageous for industrial use. Here, an emerging pretreatment technique (high-humidity hot-air impingement blanching, HHAIB) was used for peppers before drying and its effects on drying characteristics, microstructure, and polyphenol oxidase (PPO) activity were explored. The impact of drying temperature on color parameters and red pigment content of pulsed-vacuum-dried peppers was also evaluated. PPO activity was reduced to less than 20% after blanching at 110 °C for 60 s. HHAIB reduced drying time and PPO activity and promoted chemical-substance release. Effective water diffusivity was highest (5.01 × 10⁻¹⁰ m²/s) after blanching at 110 °C for 90 s, and the brightness value and red pigment content were highest (9.94 g/kg) at 70 °C. HHAIB and pulsed vacuum drying are promising pretreatment and drying methods for enhancing the drying rate and quality of red peppers.

Seabuckthorn berries are difficult to dry because the outermost surface is covered with a dense wax layer, which prevents moisture transfer during the drying process. In this study, uses of ultrasonic-assisted alkali (UA), pricking holes in the skin (PH) and their combination (UA + PH) as pretreatment methods prior to hot air drying and their effects on drying characteristics and quality attributes of seabuckthorn berries were investigated. Selected properties include color, microstructure, rehydration capacity, as well as total flavonoids, phenolics and ascorbic acid contents. Finally, the coefficient of variation method was used for comprehensive evaluation. The results showed that all pretreatment methods increased the drying rate; the combination of ultrasonic-assisted alkali (time, 15 min) and pricking holes (number, 6) (UA15 + PH6) had the highest drying rate that compared with the control group, the drying time was shortened by 33.05%; scanning electron microscopy images revealed that the pretreatment of UA could dissolve the wax layer of seabuckthorn berries, helped to form micropores, which promoted the process of water migration. All the pretreatments reduced the color difference and increased the lightness. The PH3 samples had the highest value of vitamin C content (54.71 mg/100 g), the UA5 and PH1 samples had the highest value of total flavonoid content (11.41 mg/g) and total phenolic content (14.20 mg/g), respectively. Compared to other pretreatment groups, UA15 + PH6 achieved the highest quality comprehensive score (1.013). Results indicate that UA15 + PH6 treatment is the most appropriate pretreatment method for improving the drying characteristics and quality attributes of seabuckthorn berries.

Watercore is an internal physiological disorder affecting the quality and price of apples. Rapid and non-destructive detection of watercore is of great significance to improve the commercial value of apples. In this study, the visible and near infrared (Vis/NIR) full-transmittance spectroscopy combined with analysis of variance (ANOVA) method was used for online detection of watercore apples. At the speed of 0.5 m/s, the effects of three different orientations (O1, O2, and O3) on the discrimination results of watercore apples were evaluated, respectively. It was found that O3 orientation was the most suitable for detecting watercore apples. One-way ANOVA was used to select the characteristic wavelengths. The least squares-support vector machine (LS-SVM) model with two characteristic wavelengths obtained good performance with the success rates of 96.87% and 100% for watercore and healthy apples, respectively. In addition, full-spectrum data was also utilized to determine the optimal two-band ratio for the discrimination of watercore apples by ANOVA method. Study showed that the threshold discrimination model established based on O3 orientation had the same detection accuracy as the optimal LS-SVM model for samples in the prediction set. Overall, full-transmittance spectroscopy combined with the ANOVA method was feasible to online detect watercore apples, and the threshold discrimination model based on two-band ratio showed great potential for detection of watercore apples.

This study examined the effects of hot air drying (HAD), infrared radiation drying (IRD), microwave vacuum drying (MVD), freeze drying (FD), and freeze drying combined with microwave vacuum drying (FD-MVD) on the drying kinetics, color, rehydration ratio, titratable acidity, and vitamin C content of small white apricots (Prunus armeniaca L.). Results showed drying times of 12.5 h (IRD), 14.1 h (FD), 16 h (HAD), 0.53 h (MVD), and 6.15 h (FD-MVD). FD-MVD significantly outperformed MVD, HAD, and IRD in color, vitamin C, titratable acidity, and rehydration, though was slightly inferior to FD. Microstructural analysis revealed that FD-MVD preserved the most uniform pore structure, better maintaining apricots’ original appearance. In contrast, IRD and HAD caused severe surface shriveling, compromising quality. In conclusion, FD-MVD emerges as a promising drying method to enhance apricot quality and market competitiveness in food processing.