Face masks have proven to be a useful protection from airborne viruses and bacteria, especially in the recent years pandemic outbreak when they effectively lowered the risk of infection from Coronavirus disease (COVID-19) or Omicron variants, being recognized as one of the main protective measures adopted by the World Health Organization (WHO). The need for improving the filtering efficiency performance to prevent penetration of fine particulate matter (PM), which can be potential bacteria or virus carriers, has led the research into developing new methods and techniques for face mask fabrication. In this perspective, Electrospinning has shown to be the most efficient technique to get either synthetic or natural polymers-based fibers with size down to the nanoscale providing remarkable performance in terms of both particle filtration and breathability. The aim of this Review is to give further insight into the implementation of electrospun nanofibers for the realization of the next generation of face masks, with functionalized membranes via addiction of active material to the polymer solutions that can give optimal features about antibacterial, antiviral, self-sterilization, and electrical energy storage capabilities. Furthermore, the recent advances regarding the use of renewable materials and green solvent strategies to improve the sustainability of electrospun membranes and to fabricate eco-friendly filters are here discussed, especially in view of the large-scale nanofiber production where traditional membrane manufacturing may result in a high environmental and health risk.
Knowledge of all the intermolecular forces occurring in ionic liquids (ILs) is essential to master their properties. Aiming at investigating the weaker hydrogen bonding in aprotic liquids, the present work combined computational study and far-infrared spectroscopy on four imidazolium-based ILs with different anions. The DFT calculations of the ionic couples, using the ωB97X-D functional and considering both the empirical dispersion corrections and the presence of a polar solvent, show that, for all samples, the lowest energy configurations of the ion pair present H atoms, directly bound to C atoms of the cation and close to O atoms of the anion, capable of creating moderate to weak hydrogen bonding with anions. For the liquids containing anions of higher bonding ability, the absorption curves generated from the calculated vibrational frequencies and intensities show absorption bands between 100 and 125 cm−1 corresponding to the stretching of the hydrogen bond. These indications are in complete agreement with the presently reported temperature dependence of the far-infrared spectrum, where the stretching modes of the hydrogen bonding are detected only for samples presenting a moderate interaction and become particularly prominent at low temperatures. Moreover, from the analysis of the infrared spectra, the occurrence of various phase transitions as a function of temperature was detected, and the difference in the average energy between the H-bonded and the dispersion-governed molecular configurations was evaluated.
19 March 2020 in Physical Chemistry Chemical Physics
DFT calculations with the ωB97-D functional reproduce hydrogen bonding features of the far-infrared spectra of diethylmethylammonium methanesulfonate and diethylmethylammonium trifluoromethanesulfonate.
28 October 2020 in Journal of Thermal Analysis and Calorimetry
In recent years, Electrospinning (ES) has been revealed to be a straightforward and innovative approach to manufacture functionalized nanofiber-based membranes with high filtering performance against fine Particulate Matter (PM) and proper bioactive properties. These qualities are useful for tackling current issues from bacterial contamination on Personal Protective Equipment (PPE) surfaces to the reusability of both disposable single-use face masks and respirator filters. Despite the fact that the conventional ES process can be upscaled to promote a high-rate nanofiber production, the number of research works on the design of hybrid materials embedded in electrospun membranes for face mask application is still low and has mainly been carried out at the laboratory scale. In this work, a multi-needle ES was employed in a continuous processing for the manufacturing of both pristine Poly (Vinylidene Fluoride-co-Hexafluoropropylene) (PVDF-HFP) nanofibers and functionalized membrane ones embedded with TiO2 Nanoparticles (NPs) (PVDF-HFP@TiO2). The nanofibers were collected on Polyethylene Terephthalate (PET) nonwoven spunbond fabric and characterized by using Scanning Electron Microscopy and Energy Dispersive X-ray (SEM-EDX), Raman spectroscopy, and Atomic Force Microscopy (AFM) analysis. The photocatalytic study performed on the electrospun membranes proved that the PVDF-HFP@TiO2 nanofibers provide a significant antibacterial activity for both Staphylococcus aureus (~94%) and Pseudomonas aeruginosa (~85%), after only 5 min of exposure to a UV-A light source. In addition, the PVDF-HFP@TiO2 nanofibers exhibit high filtration efficiency against submicron particles (~99%) and a low pressure drop (~3 mbar), in accordance with the standard required for Filtering Face Piece masks (FFPs). Therefore, these results aim to provide a real perspective on producing electrospun polymer-based nanotextiles with self-sterilizing properties for the implementation of advanced face masks on a large scale.
In this study, we combined experimental Piezoresponse Force Microscopy (PFM) analysis with an empirically corrected Furukawa model to predict the piezoelectric behavior of Poly(Vinylidene Fluoride-co-Trifluoroethylene) (PVDF-TrFE) films functionalized with CoFe 2 O 4 (CFO) Magnetic Nanoparticles (MNPs). According to our empirical model, the piezoelectric response observed from PFM analysis on the PVDF-TrFE/CFO films was mainly influenced by the interaction between the CFO MNPs and the polymer active β phase of the polymer, providing a high piezoelectric coefficient d33 (~ 6.5 pm/V) at a low CFO concentration of 5 wt%. Experimental observation of the morphological formation of the polar β domains and their phase dependence from the CFO MNPs amounts have been investigated by means of Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), and Fourier Transform Infrared (FT-IR) spectroscopy analysis. Also, the local magnetic response of the PVDF-TrFE/CFO film at 5 wt% was investigated through Magnetic Force Microscopy (MFM) with a controlled magnetized tip. DC magnetic poling of the PVDF-TrFE/CFO film at 5 wt% resulted in a significant increase in the d33 (~ 34 pm/V) under an applied external magnetic field of ~ 50 mT. A theoretical model of chain aggregate-like structure formation in magnetizable polymer-based nanocomposites was employed to explain the effect of CFO MNP chain unification on the local piezoelectric strain response of PVDF-TrFE/CFO films under low magnetic fields. This finding provide further insight into the implementation of flexible PVDF-TrFE/CFO thin nanocomposites with tailored piezoelectric performance, enhancing their efficiency in energy harvesting and advancing the development of next-generation piezoelectric devices.