Chenglong Liu

Dr. Chenglong Liu

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 October 2023 in Lubricants
Verified
Journal Article
Open access
PDF file
WLWei Li
Wei Li
Feng GuoFeng Guo
Feng Guo
CLChenglong Liu
Chenglong Liu
ZMZhaoqun Ma
Zhaoqun Ma
Using an optical elastohydrodynamic lubrication (EHL) test rig, oil film thickness and the coefficient of friction (COF) were measured, and the influence of stearic acid additive on the EHL performance of mineral oil 2137 was investigated. The results showed that 2137 with 0.3 wt% stearic acid (denoted to as 2137s) achieved the same film thickness as 2137, while the COF of 2137s was significantly lower than that of 2137 when the contact was under conditions of a fully lubricant supply. Under conditions of limited lubricant supply, 2137 base oil was prone to oil starvation with the increase of entrainment velocity. On the other hand, 2137s significantly mitigated the oil starvation. This was attributed to the fact that lower surface energy by the adsorption of stearic acid results in discontinuous oil-droplet distribution on the lubrication track and, therefore, early pressure generation. Moreover, it is interesting to find that less 2137s supply quantity can produce higher film thickness when the contact is at high speeds, which is attributed to the fact that a smaller quantity of 2137s gives smaller droplets on the lubrication track, and the resultant small surface area–volume ratio presents oil more resistance to the centrifugal force and results in less oil escaping from the lubrication track. The addition of stearic acid reduced the average COF of 2137 mineral oil by about 13.3%

23 April 2025 in Lubricants
Verified
Journal Article
Open access
PDF file
TZTianrui Zhang
Tianrui Zhang
CLChenglong Liu
Chenglong Liu
XLXinming Li
Xinming Li
Feng GuoFeng Guo
Feng Guo
KZKongmin Zhu
Kongmin Zhu
A novel composite groove array surface was fabricated using femtosecond laser ablation technology to enhance self-replenishment capability. Initially, the driving efficiency of droplets on the composite groove array surface was tested using a high-speed droplet transportation system, characterizing the effect of this surface on lubricant backflow characteristics. Simultaneously, measurement of lubricating film thickness was utilized to explore the lubrication enhancement effect of the composite groove array surface on oil film formation under reciprocating motion. The multidimensional gradient wettability, engineered through the composite groove array surface, demonstrated excellent efficiency in lubricant replenishment within the lubrication track. Oil droplet transportation testing demonstrated that the composite groove array surface, which induced gradient wettability at the boundary, attained a maximum driving speed of 123.5 mm/s. This innovative design significantly reduced the barriers associated with lubricant backflow, particularly those induced by cavitation expansion during high-frequency reciprocating motion. Furthermore, the results demonstrated that the film-forming capabilities of this composite groove array surface were enhanced, thereby optimizing the overall lubrication performance.

31 March 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
TZTianrui Zhang
Tianrui Zhang
CLChenglong Liu
Chenglong Liu
XLXinming Li
Xinming Li
Feng GuoFeng Guo
Feng Guo
KZKongmin Zhu
Kongmin Zhu
A novel composite groove array surface was fabricated using femtosecond laser ablation technology to enhance the self-replenishment capability. Initially, the driving efficiency of droplets on composite groove array surface was tested using a high-speed droplet trans-portation system, characterizing the effect of this surface on lubricant backflow character-istics. Simultaneously, measurement of lubricating film thickness was utilized to explore the lubrication enhancement effect of composite groove array surface on oil film formation under reciprocating motion. The multi-dimensional gradient wettability, engineered through the composite groove array surface, demonstrated excellent efficiency in lubricant replenishment within the lubrication track. As the oil droplet transportation testing results demonstrated, the composite groove array surface, which induced gradient wettability at the boundary, attained a maximum driving speed of 123.5 mm/s. This innovative design significantly reduced the barriers associated with lubricant backflow, particularly those induced by cavitation expansion during high-frequency reciprocating motion. Further-more, the results exhibited the enhanced film-forming capabilities of this composite groove array surface, thereby optimizing the overall lubrication performance.

3 December 2023 in Lubricants
Verified
Journal Article
Open access
PDF file
CLChenglong Liu
Chenglong Liu
WLWei Li
Wei Li
Feng GuoFeng Guo
Feng Guo
PWPatrick Wong
Patrick Wong
XLXinming Li
Xinming Li
Oil–air lubrication has proven to be very effective for high-speed bearings because the oil supply in the form of droplets can be precisely controlled. This work uses optical interferometry to study the mechanism of lubricating film formation in rolling point contact with oil droplet lubrication. The effect of a double oil drop pair, where two oil droplets are positioned in mirror images about the central axis of the lubricated track, is examined. The process by which pairs of oil droplets approach and lubricate a bearing contact is analysed. This study also covers the effect of multiple oil droplets supplied in a tailored or a random dispersion pattern. Additionally, the effects of oil viscosity, entrainment velocity, and droplet distribution on starvation are also investigated.

17 November 2025 in Lubricants
Verified
Journal Article
Open access
PDF file
KZKe cheng Zhou
Ke cheng Zhou
XJXuyang Jin
Xuyang Jin
XLXinming Li
Xinming Li
QBQinghua Bai
Qinghua Bai
XHXiongrong Huang
Xiongrong Huang
JLJinjie Li
Jinjie Li
The cage shape plays a critical role in controlling lubricant distribution and replenishment and enhancing lubrication performance within rolling bearings. This study investigates the effect of four tailored cage shapes on lubricant migration and frictional characteristics at both Ball-Cage (B-C) and Ball-Disc (B-D) contacts. Utilizing a bearing cage friction and lubrication test rig (BCFL), adapted from an optical elastohydrodynamic lubrication (EHL) apparatus, the variation in grease films and friction forces was examined under varying entrainment speeds, grease properties, and grease quantities. Cage-induced lubricant redistribution on the ball surface, replenishment at the B-D contact, and the formation mechanism of thicker film thickness were recognized. The influence of cage design for four distinct shapes on mechanisms enhancing grease lubrication efficiency and friction reduction was examined. The findings provide critical insights for designing next-generation self-aligning cage structures with improved lubrication performance and reduced friction force.

1 January 2026 in The International Conference on Computational & Experimental Engineering and Sciences
Verified
Journal Article
Open access
PDF file
CLChenglong Liu
Chenglong Liu
FGFeng Guo
Feng Guo
XLXinming Li
Xinming Li
Marine equipment bearings frequently operate under harsh conditions characterized by elevated humidity, subzero temperatures, and inevitable seawater intrusion. The operational reliability and durability are paramount to advancing offshore technologies. When water invades the contact area, it significantly alters the physical and chemical properties of the lubricating grease, leading to a drastic reduction in its film thickness forming capability. This degradation causes the lubricant’s load-carrying capacity to drop, forcing bearings into a starvation lubrication, which accelerates wear and corrosion. Although extensive research has focused on oil replenishment mechanisms within bearing contacts, active dewatering strategies remain notably underdeveloped. To address these dual challenges, this study proposes a novel functional surface that synergizes femtosecond laser-induced micro-textures with a polytetrafluoroethylene (PTFE) coating to achieve significant lubrication enhancement under water intrusion.