Using the method of a life cycle inventory (LCI) analysis, the energy balance and the carbon dioxide (CO₂) emission of logging residues from Japanese conventional forestry as alternative energy resources were analyzed over the entire life cycle of the residues. The fuel consumption for forestry machines was measured in field experiments for harvesting and transporting logging residues at forestry operating sites in Japan. In addition, a total audit of energy consumption was undertaken. It involved an assessment of materials, construction, and the repair and maintenance of forestry machines as well as the costs associated with an energy-conversion plant. As a result, the ratio of energy output to input was calculated to be 5.69, indicating that the system examined in this study could be feasible as an energy production system. The CO₂ emission per MWh_e (e: electricity) of the biomass-fired power generation plant was calculated to be 61.8 kgCO₂/MWh_e, while that of coal-fired power generation plants in Japan is 960 kgCO₂/MWh_e. Therefore, the reduction in the amount of CO₂ emission that would result from replacing coal with biomass for power generation by as much as 3.0 million dry-t/year of logging residues in Japan was estimated to be 1.66 million tCO₂/year, corresponding to 0.142% of the national CO₂ emission. This study provides evidence that Japan could reduce its domestic CO₂ emission by using logging residues as alternative energy resources.

The purpose of this study is to examine the feasibility of a system to harvest logging residues (or slashes) as a new resource for energy in Japan. A harvesting and transporting system for residual forest biomass was constructed with reference to some European countries where the utilization of bioenergy is making steady progress and examined on the basis of field experiments in Japanese forestry. The feasibility of the system is discussed from the standpoints of cost and energy, and the system is compared with those of the European countries. With respect to the system proposed in this study, it is desirable that the process of chipper comminuting is incorporated into the system as early as possible, considering the trends of harvesting cost and fuel consumption per unit weight of residual forest biomass. Such a system is not particularly feasible in Japan from the standpoint of the harvesting cost per MWh of bioenergy. However, no specific problems are found from the point of view of the energy input rate, and it is clarified that it is possible for Japan to reduce domestic carbon dioxide emissions by utilizing biomass as an energy resource. A comparison with the European countries and a preliminary sensitivity analysis of the system demonstrate that the technical development to reduce the harvesting cost,e.g., improving the forwarding and transporting efficiency, and support from the government are essential for realizing bioenergy utilization in Japan.