The permanent magnet synchronous motor (PMSM) can be a suitable candidate for electrified propulsion in aviation. Despite the very high efficiency, heat dissipation during operation leads to performance limitations. Elevated temperatures in the electrical insulations and the magnets pose a potential safety risk that must be reduced by selective cooling. A comprehensive review is conducted to capture current research interests in cooling methods in PMSM. Cooling methods are described according to their heat transfer mechanism, grouped, and assigned to the components within the motor. Key findings of the literature reviewed are described in the context of PMSM cooling. Information on cooling media and potential combinations of cooling methods in components is gathered. Assessment parameters such as safety, weight, effectiveness, integrability, complexity and cost are defined to enable a subsequent qualitative analysis for six selected cooling methods. A point-weighted evaluation approach, according to VDI 2225, was applied to identify the most promising cooling approach for successful implementation in aviation.
Transformation of the aviation sector towards climate-neutral solutions such as electrification is urgent. Aviation electrification requires reasoned selection of suitable technologies which has to meet strict requirements and standards. Cooling of electrical components plays a vital role in the sizing and overall performance of the electrical drive system and must achieve high effectiveness and reliability at low weight. Three cooling methods – air cooling, direct slot cooling and cooling jacket – are sized for a 300 kW commuter aircraft (CS23) all-electric propulsion system. They are further evaluated quantitatively for weight, drag, reliability and effectiveness in a conservative assessment. A lumped parameter thermal network (LPTN) approach is utilized to assess and evaluate the thermal performance of the cooling systems. The LPTN model served as the basis to determine the temperature limits and capabilities of the cooling system which are then utilized to size the auxiliary components. Reliability is assessed via fault tree analysis, drag via scoop inlet characteristics and effectiveness via the heat load dissipated per weight of the system and the required cooling power per mechanical power. Cooling jacket achieves the highest effectiveness closely followed by slot cooling. Air cooling proves to be most reliable and lightest.
10 September 2026 in Journal of Engineering for Gas Turbines and Power
Hybrid-electric or full-electric propulsion systems are considered as potential solutions for sustainable aviation, providing reduced emissions and improved efficiency. However, among the various challenges associated with thermal management in electric propulsion systems, the design and integration of heat exchangers remain particularly critical. Heat exchangers with large frontal areas can significantly increase aerodynamic drag, thereby reducing overall system efficiency and aircraft performance. Therefore, innovative approaches are required to mitigate or overcome these drawbacks, for instance, through advanced compact heat exchanger designs, optimized integration within the airframe/duct, and the use of novel materials or manufacturing techniques that enhance heat transfer while minimizing drag penalties. The aerodynamic drag can be mitigated partially or even completely by using ducted heat exchangers. In this regard, this paper investigates a variable duct geometry at both the inlet and outlet, exploring the impact of varying diffuser and nozzle geometries on realizing the benefits of Meredith effect and drag minimization. A thermodynamic efficiency relation for the duct process is derived as a function of geometrical and operating conditions. Computational fluid dynamics (CFD) simulations for a scoop inlet are carried out using a pressure-based coupled solver with far-field boundary conditions to accurately assess the aerodynamic behavior. The results demonstrate that a fixed-geometry duct cannot satisfy the conflicting requirements of different phases of the flight envelope. Parametric analysis identified that a diffuser with 4 deg half-angle and nozzle with 13 deg half-angle showed the best performance for cruise phase, moderately reducing the cooling drag to offset the high heat loads. A 4 deg diffuser and 15 deg nozzle are found to be suitable during takeoff to ensure aerodynamic stability at low speeds, while a more open geometry proved effective for drag maximization during descent. No benefits of Meredith effect are realized at the assessed heat loads and aircraft speeds due to the losses from the duct arrangement considered. These findings confirm that adaptive variable inlet and outlet geometry is essential for minimizing the aerodynamic penalties of thermal management in next-generation electric aircraft.