The permanent magnet synchronous motor (PMSM) can be a suitable candidate for electrified propulsion in aviation. Despite the very high efficiency, heat dissipation during operation leads to performance limitations. Elevated temperatures in the electrical insulations and the magnets pose a potential safety risk that must be reduced by selective cooling. A comprehensive review is conducted to capture current research interests in cooling methods in PMSM. Cooling methods are described according to their heat transfer mechanism, grouped, and assigned to the components within the motor. Key findings of the literature reviewed are described in the context of PMSM cooling. Information on cooling media and potential combinations of cooling methods in components is gathered. Assessment parameters such as safety, weight, effectiveness, integrability, complexity and cost are defined to enable a subsequent qualitative analysis for six selected cooling methods. A point-weighted evaluation approach, according to VDI 2225, was applied to identify the most promising cooling approach for successful implementation in aviation.
30 October 2025 in International Journal of Thermofluids
Transformation of the aviation sector towards climate-neutral solutions such as electrification is urgent. Aviation electrification requires reasoned selection of suitable technologies which has to meet strict requirements and standards. Cooling of electrical components plays a vital role in the sizing and overall performance of the electrical drive system and must achieve high effectiveness and reliability at low weight. Three cooling methods – air cooling, direct slot cooling and cooling jacket – are sized for a 300 kW commuter aircraft (CS23) all-electric propulsion system. They are further evaluated quantitatively for weight, drag, reliability and effectiveness in a conservative assessment. A lumped parameter thermal network (LPTN) approach is utilized to assess and evaluate the thermal performance of the cooling systems. The LPTN model served as the basis to determine the temperature limits and capabilities of the cooling system which are then utilized to size the auxiliary components. Reliability is assessed via fault tree analysis, drag via scoop inlet characteristics and effectiveness via the heat load dissipated per weight of the system and the required cooling power per mechanical power. Cooling jacket achieves the highest effectiveness closely followed by slot cooling. Air cooling proves to be most reliable and lightest.
31 March 2023 in Indian Journal of Community Health
Background: Chronic viral hepatitis is a major global public health problem, an important cause of morbidity and mortality. We conducted this study to evaluate the behavioral risk factors of HBV infection and its association with HBsAg positivity among residents of Kaza sub-division of district Lahaul & Spiti in Himachal Pradesh. Material & Methods: The study was carried out by the Gastroenterology, Community Medicine, and Microbiology Department at Indira Gandhi Medical College Shimla at Kaza, a subdivision of Lahaul & Spiti. The cluster sampling technique was used to get the desired sample size of 4000. Forty clusters were chosen using a probability proportionate to size sampling method, and 100 research participants were added to each cluster using a simple random sampling method. The data was gathered using a pre-tested interview plan. A blood sample of 5ml from each study participant was obtained, and its HBsAg content was examined. Results: In our study, 2.7% of the interviewed respondents’ parents were positive for hepatitis B and 3.7% reported one positive family member. Injectable drug use was reported by 1.6 (68/4231). Among these users 8.8% (6/68) shared needles with other IDUs in last 12 months and 35.3% (24/68) used a common container to draw up drug solution. Sexual intercourse was reported to be experienced by 15.5 (655/4231) and 12.2% either did not disclose or were children. Out of those who ever experienced sexual/penetrative intercourse 38.3% (251/655) had reported it with someone else other than a spouse. Majority of these had two partners other than a spouse (30.3%; 76/251). Around 30% (195/655) reported of using a condom in their last intercourse. Body piercings or a tattoo from someone who doesn’t sterilize his or her equipment, including local treatment from lamas, was prevalent among 16.3% of the population (689/4231). Acupuncture was taken as a remedy for any medical condition by 9% of participants. Regression analysis also revealed that one infected family member emerged as an independent factor associated with HBsAg positive test after adjusting for confounders. Conclusion: Our study provided much important information concerning hepatitis B risk factors in this tribal group. Health education about behavioral risk factors among this tribal population should be the main intervention that might help limit the spread of these blood-borne infections.