Fibrous-type filters are used to capture dust particles in mining and other occupations where personnel are exposed for prolonged periods. Dust cleansing devices including flooded-bed dust scrubbers use these mesh-type multi-layered filters. These filters trap dust particles efficiently on their surface and inside their mesh. However, their continued operation leads to dust build-up and clogging. This results in increased resistance of the filter and lowered airflow rate through the scrubber. This could potentially enhance the exposure of the miners. A non-clogging self-cleaning impingement screen type dust filter was designed by the authors for use in mining and industrial dust cleansing applications. The filter guides dirt-laden air through rapidly turning paths which forces it to shed heavier particles. The particles impact one of the impermeable solid metallic filter surfaces and are removed from the airstream. A full cone water spray installed upstream prevents any surface build-up of dust. This paper summaried the computer models generated to show the filter operations and laboratory experiments including optical particle counting to establish the cleaning efficiency.
Fibrous-type dust filters are used in flooded-bed dust scrubbers to capture dust from underground room and pillar mining atmospheres. They have 10–30 layers of finely woven strands that trap particles through the interception and impaction process. A full-cone water spray is installed upstream of the filter, which floods the screen. A scrubber’s efficacy is usually measured and reported in terms of reduction in gravimetric dust concentration at a known location in a mine. This paper reports the particle-size-dependent dust removal efficiency of a fibrous filter obtained from an instrumented test-set up. A variable frequency drive and an inline flow control knob were used to control the airflow through the filter and water flow onto the filter. Optical particle counting of coal dust particles upstream and downstream was carried out to determine the cleaning efficacy. Experiments showed an increase in cleaning efficiency for all the dust particles with their size. A progressive decrease in dust concentration downstream of the filter with an increase in water flow through the nozzle affirmed the capture of dust particles by water sprays.
This paper introduces an analytical approach to optimize the design of immittance matching networks that provide gain and reactive compensation in capacitive wireless power transfer (WPT) systems while maintaining load-independent output current. The proposed approach maximizes the matching network efficiency by identifying the optimal number of matching network stages, and by optimally distributing the overall gain among these stages. Compared to the conventional approach to designing immittance matching networks in capacitive WPT systems, the proposed approach is shown to achieve 82% smaller losses. A 6.78-MHz capacitive WPT prototype utilizing immittance matching networks is designed and built, and the measured network efficiency is shown to match well with analytical predictions.
28 July 2025 in International Journal of Coal Science & Technology
The use of lithium-ion batteries (LIBs)-operated underground mining machinery has gained tremendous momentum as a result of their numerous advantages. This includes their high energy density, long cycle life, high voltage delivery, low heat release, stability, negligible memory effects, and low carbon footprint. Battery operated vehicles are also preferred in underground mines for their flexibility. They do not emit harmful pollutants during nominal operations, making the work environment safer for miners. However, thermal runaway (TR) incidents can occur which presents risks to miners and underground infrastructure. Therefore, it is crucial to understand battery operations and their failure mechanisms. This article outlines the advantages of LIBs, the necessary precautions for their safe operations underground, the conditions and impact of TR events, battery management systems, handling LIB fire emergencies, and the research opportunities to promote safer and widespread use. Graphical
19 September 2020 in Mining, Metallurgy & Exploration