The annual discharge (6–7 million tons per year) of Chinese medicine industry waste (CMIW) is large and harmful. CMIW with a high moisture content can be effectively treated by hydrothermal carbonization (HTC) technology. Compared with CMIW, the volume and number of pores of the prepared hydrochar increased significantly after alkali etching (AE), and they had abundant oxygen-containing functional groups. These properties provide physical and chemical adsorption sites, improving the adsorbent activity of the alkaline etching of Chinese medicine industry waste hydrochar (AE-CMIW hydrochar). However, few studies have investigated the adsorption of organic dyes and heavy metals in mixed solutions. This study proposed a method of coupling HTC with AE to treat CMIW and explored the potential of AE-CMIW hydrochar to remove metal ions and organic dyes from mixed solution. We analyzed the removal rates of metal ions and organic dyes by the adsorbents and investigated their differences. The results showed that the lead ion, cadmium ion, and methylene blue could be efficiently removed by AE-CMIW hydrochar in a mixed solution, with removal rates of more than 98%, 20–57%, and 60–80%, respectively. The removal rates were different mainly due to the various electrostatic interactions, physical adsorption, differences in the hydrating ion radius of the metal ions, and functional group interactions between the AE-CMIW hydrochar and the lead ion, cadmium ion, and methylene blue. This study provides a technical method for preparing multi-pollutant adsorbents from CMIW, which enables efficient utilization of organic solid waste and achieves the purpose of treating waste with waste.
Low-cost powdered activated coke (PAC) produced by a one-step rapid method with lignite was used as an adsorbent for the advanced treatment of phenol-containing wastewater to evaluate the feasibility of replacing high-cost commercial powdered activated carbon. Characterization using infrared spectral analysis, SEM, and BET showed that the PAC mesopores were well developed. PAC exhibited a high adsorption performance for phenol in static experiments. The adsorption was almost in equilibrium within 20 min, and the removal efficiency reached 85.4% with 1.5 g L−1 PAC and 99.9% with 4 g L−1 PAC. As common components in wastewater, NaCl and Na2SO4 did not exhibit significant competitive adsorption with phenol in PAC. The adsorption process occurred in accordance with the Langmuir model and the pseudo-second order kinetic model. Furthermore, the effects of hydrothermal regeneration on PAC adsorbing phenol were studied, and the adsorption capacity of PAC after five regeneration cycles was 86.1% of that of the new PAC, which still had good adsorption performance. PAC offers significant advantages in terms of adsorption capacity, economic feasibility, regeneration, and recycling, providing a practical solution to the problem of phenol-containing wastewater pollution.
Activated carbon has shown good catalytic performance in water treatment, but its wide application is limited by its high price. Activated coke exhibits functional groups and is low-cost. However, there is limited research on activated coke as a catalyst. In our previous study, powdered activated coke (PAC) exhibited good catalytic performance in NH3-N treatment with ozonation. Increasing nitrogen selectivity is the key to harmless degradation of NH3-N, which has received little attention. In this paper, manganese-loaded powdered coke (Mn–PAC) was prepared, aiming to further improve the nitrogen selectivity. Under the same conditions, the PAC/O3 system achieved 92.16% NH3-N removal and 49.46% nitrogen selectivity, while the Mn–PAC/O3 system achieved almost 100% NH3-N removal and 79.31% N2 selectivity. When Mn–PAC was reused for the sixth time, the system achieved about 70% and 46% NH3-N removal and N2 selectivity, both of which were about 10% higher than those of PAC. Complex redox and synergistic interactions existed in the Mn–PAC/O3 system. The Mn–PAC surface contains reactive sites such as C=C, C=O, π–π bonds, ArOH, and various MnOx. These components collectively facilitate ozone decomposition into ·OH, ·O2−, and 1O2. The 1O2 may play a significant role in converting NH3-N to N2.