This article discusses the main technologies for processing titanium-containing raw materials, the advantages, and disadvantages of various technological solutions. The analysis of the literature revealed that the traditional methods for the production of titanium products are mainly focused on the use of ilmenite concentrates. In connection with the depletion of ilmenite deposits, in the near future, there will inevitably be a need for a switch to the use of complex ores – titanomagnetite. Obtaining titanium dioxide (TiO2) from titanomagnetite raw materials with a high content of impurity components requires an individual approach for each specific deposit. The possibility of further improving the development of a technological process for low-temperature (1000–1200 °C) processing of titanomagnetite concentrates via the production of pure TiO2 is proposed.
Niobium commonly occurs as a minor component in Fe–Ti–O oxide systems associated with ilmenite ores and titanium-bearing metallurgical materials, yet its speciation and incorporation mechanisms remain insufficiently resolved. This study investigates the distribution, structural incorporation, and microphase localization of niobium in the Fe–Ti–O system, with emphasis on TiO2-rich domains. Electron probe microanalysis with EDS/WDS, X-ray diffraction, thermal analysis, and thermodynamic modeling in HSC Chemistry were combined to characterize niobium-bearing phases in natural and model oxide systems. Niobium was found to occur in two principal modes: as a low-level isomorphic impurity in Fe–Ti oxide matrices and as localized enrichments in TiO2-rich domains, particularly rutile lamellae. A first-order area-based estimate for representative analyzed grains suggests that approximately 60–80% of the detected niobium is associated with the lamellar TiO2 channel. The combined observations are consistent with a sequential mechanism involving isomorphic substitution of Nb in Ti sites, followed by microphase enrichment and segregation into more compositionally distinct niobium-bearing oxide or titanate microphases. In the studied material, integrated mapped-field Nb is about 0.04 wt.%, whereas matrix Nb commonly lies at trace levels of about 0.02–0.05 wt.% under the applied analytical conditions, consistent with low-level background incorporation, whereas locally Nb-enriched rutile-like domains reach about 0.70–1.00 wt.%. TiO2-rich domains are therefore identified as the principal concentrators of niobium in Fe–Ti oxide systems. Taken together, the natural observations, model experiments, and thermodynamic calculations support an integrated mechanistic sequence of Nb evolution in the Fe–Ti–O system: isomorphic substitution → microphase enrichment in TiO2-related domains → segregation into distinct Nb-bearing oxides/niobates. These findings provide a practical framework for interpreting Nb behavior in natural and technological Fe–Ti–O materials.
The development of efficient technologies for processing secondary technogenic raw materials represents a promising approach to replenishing vanadium resources. This study investigates the processes of sulfuric acid reductive leaching of vanadium from spent vanadium catalysts using oxalic acid and metallic iron as reducing agents. It was established that oxalic acid provides vanadium extraction of up to 95.2%, whereas the use of metallic iron (2–3 wt.% of the catalyst mass) enables a vanadium recovery rate of 91–92% at a solid-to-liquid ratio of 1:7 and pH 1.3–1.5, offering a more cost-effective alternative. Thermodynamic modeling of the V–Fe–P–SO4–C2O4–H2O system was performed using the Medusa software package over a pH range of 0–3. The results showed that vanadium(IV) predominantly exists as the VOSO4 complex in sulfuric acid solutions, whereas the formation of oxalate and phosphate complexes is thermodynamically insignificant. Iron(III) was found to exhibit a strong affinity toward phosphate ions, promoting their selective precipitation as an iron phosphate phase while maintaining vanadium in solution. The obtained results provide a scientific basis for the efficient preliminary separation of iron and vanadium and for improving the selectivity of subsequent vanadium sorption.