This study assessed the distribution of microplastics (MPs) in the gills, intestines, and muscles of the common carp (Cyprinus carpio), one of main fish species consumed by humans living in the lower regions of the Han River in South Korea. In total, 891 MP particles were detected in 15 carps, with an average of 59.4 ± 45.5 particles/specimen, indicating severe MP contamination. The predominant MP form was fragment (86%), and the size range was 0.02–0.10 mm. Thirty MP particles were detected in the muscle samples (n = 10), primarily in sizes < 0.1 mm (89%). The most common types of polymers detected in this study were polyethylene (≥42%), polystyrene (≥20%), and polypropylene (≥19%), which were at the same level as the polymer ratio of domestic plastic production/use. No correlation was observed between the length of common carp and the number of MPs detected in different body tissues, indicating an abundance of MPs in the environment rather than by residue and accumulation. These findings contribute to the evaluation of the potential impact of edible fish on human health and emphasize the need to develop strategies to reduce MP contamination originating from various potential land sources.

New approaches and techniques are required for environmental management in workplaces that emit pollutants. The best available techniques (BATs) that are suggested by the integrated environmental permit system (IEPS) play a pivotal role in providing state-of-the-art approaches and techniques to workplaces. For the workplaces that install facilities with the BATs, it is necessary to perform real-time monitoring to determine whether pollutant emission facilities and treatment facilities are operating normally and whether such facilities can maintain the optimal condition during the emission of pollutants. The environmental management measures used before the IEPS had limitations for workplaces that are subjected to integrated environmental management because they consider the entire workplace as a single pollution source by combining all media. In addition, only the emission concentrations and amounts of pollutants were monitored because only the points at which most pollutants are discharged, i.e., stacks for air pollutant emission facilities and final effluent outlets for water pollutant emission facilities, are monitored. These monitoring approaches in a variety of facilities involve considerable costs, and most of them (95% for stacks in workplaces under IEPS, Korea) cannot perform real-time observation even though some of them are capable of it (5% for stacks managed by Tele Monitoring System, TMS). In this study, the applicability of a wireless sensor monitoring network was examined as a new approach for environmental management in workplaces. Based on the sensor monitoring network, surrogate parameters that can indirectly monitor the critical operating factors of pollutant emission and prevention facilities were developed and then measured in real time to examine the status of these facilities. Surrogate parameters can be used instead of directly measuring pollutants as the former has high efficiency, such as cost reduction, and can provide reliable data on the emission characteristics of pollutants. The wireless network is based on an Internet of Things (IoT) platform under real-time conditions in the emission and production facilities in a workplace. This study suggested that a wireless network using the IoT platform improves the BAT assessment methodology to understand the efficiency of environmental pollution reduction and the economic contribution to the workplace.