The design requirements for the hydrodynamic performance of underwater vehicles vary significantly depending on the application. Optimization without an initial model results in challenges such as large design domains, nonlinear complexity, and high data requirements. To optimize the hydrodynamic performance during the design process, in this paper, a multi-surrogate model was employed to progressively design the shape of an autonomous and remotely-operated vehicle. Based on the data characteristics of different stages, this approach strikes a balance among data quantity, prediction accuracy, and multi-objective requirements. An artificial neural network prediction surrogate model was constructed based on the principle of the minimum prediction factor using the optimal Latin hypercube sampling method. During the optimization of the design domain, the optimum objective was to minimize the dimensionless force (G(x)). During the multi-objective optimization stage, a regression kriging surrogate model was constructed based on a support vector product. The optimization objectives were to maximize volume and minimize dimensionless forces. This enabled the overall design process to attain optimal Pareto solutions within the design domain while simultaneously ensuring high prediction accuracy and minimum data requirements. The results obtained are consistent with the simulation comparison, thus verifying the reliability of the entire optimization process.

This paper investigates the stability issues of the Unmanned Surface Vehicle (USV)–Unmanned Underwater Vehicle (ROV) system induced by cable loads under real marine conditions and high-speed operation. This study focuses on the dynamic coupling characteristics of cable forces affecting the unmanned platform and outlines the variation patterns of these forces under different operational scenarios. By developing the dynamic models of the USV, UC, and UUV, a comprehensive system model for the unmanned marine platform is constructed. The accuracy of the cable model is validated through experimental results, and the coupling interference effects of the cable during collaborative operations are systematically analyzed from multiple perspectives. Additionally, the cable tension and force behaviors under high-speed cruising conditions are thoroughly examined. The results provide a solid foundation for the development of cable load prediction models for collaborative marine unmanned platforms, and offer both theoretical and numerical insights for dynamic control strategies based on cable force adjustments.