We propose a new phase detection technique based on a flux-switchable superconducting circuit, the Josephson digital phase detector (JDPD), which is capable of discriminating between two phase values of a coherent input tone. When properly excited by an external flux, the JDPD is able to switch from a single-minimum to a double-minima potential and, consequently, relax in one of the two stable configurations depending on the phase sign of the input tone. The result of this operation is digitally encoded in the occupation probability of a phase particle in either of the two JDPD wells. In this work, we demonstrate the working principle of the JDPD up to a frequency of 400 MHz with a remarkable agreement with theoretical expectations. As a future scenario, we discuss the implementation of this technique to superconducting qubit readout. We also examine the JDPD compatibility with the single-flux-quantum architecture, employed to fast-drive and measure the device state.
Aluminum Josephson junctions are the building blocks for the realization of superconducting quantum bits. Attention has been also paid to hybrid ferromagnetic Josephson junctions, which allow switching between different magnetic states, making them interesting for applications such as cryogenic memories, single-photon detectors, and spintronics. In this paper, we report on the fabrication and characterization of high-quality ferromagnetic Josephson junctions based on aluminum technology. We employed an innovative fabrication process inspired by niobium-based technology, allowing us to obtain very high-quality hybrid aluminum Josephson junctions; thus, supporting the use of ferromagnetic Josephson junctions in advanced quantum circuits. The fabrication process is described in detail and the main DC transport properties at low temperatures (current–voltage characteristic, critical current as a function of the temperature, and the external magnetic field) are reported. Here, we illustrate in detail the fabrication process, as well as the main DC transport properties at low temperatures (current–voltage characteristic, critical current as a function of the temperature, and the external magnetic field).
Superconducting nanowire single-photon detectors (SNSPDs) are receiving the interest of the scientific and industrial communities due to their unparallel high performances in the infrared. However, even though the fabrication process permits the achievement of about 98% efficiency and less than 1 cps dark-count rate, the physical mechanism inducing the detection remains unclear. It is clear however that normal core vortices play a crucial role. In this work we investigate the role of vortices in two-dimensional (2D) molybdenum silicide SNSPDs of different widths covered with an layer through the analysis of the switching current distributions from the superconducting to resistive regime, in a wide interval of temperatures from 4.5 K down to 10 mK. This analysis provides the energy scales of different mechanisms that are responsible for fluctuations and dark counts in SNSPDs. We consider two models based on vortices, the unbinding of vortex-antivortex pairs (VAPs) and vortices hopping over the edge barrier (VH) and we underline the differences among different devices made by different materials. We also estimate the energy scales of similar and devices and compare the results. The lower activation energies obtained for devices, explain the peculiarity of this material to work at longer wavelengths with a higher quantum detection efficiency.
The competition between superconducting and ferromagnetic orderings in Josephson devices has promoted fundamental and applicative studies of high impact for superconducting digital technology, cryogenic memories, and spintronics, where the possibility of switching between different magnetic states is a crucial advantage. Here, we report on fabrication and characterization of very high quality tunnel ferromagnetic Josephson junctions (JJs) with aluminum electrodes, demonstrating hysteretic behavior of the magnetic field pattern preserving typical transport properties of Al junctions, underdamped behavior, and very low quasiparticle dissipation. The proposed technology paves the way for the possible implementation of Al tunnel-ferromagnetic JJs in superconducting quantum circuits, toward alternative approaches based on digital control of the Josephson device.
We discuss the capabilities of ferromagnetic (F) Josephson junctions (JJs) in a variety of layouts and configurations. The main goal is to demonstrate the potential of these hybrid JJs to disclose new physics and the possibility to integrate them in superconducting classical and quantum electronics for various applications. The feasible path towards the use of ferromagnetic Josephson junctions in quantum circuits starts from experiments demonstrating macroscopic quantum tunneling in NbN/GdN/NbN junctions with ferro-insulator barriers and with triplet components of the supercurrent, supported by a self-consistent electrodynamic characterization as a function of the barrier thickness. This has inspired further studies on tunnel ferromagnetic junctions with a different layout and promoted the first generation of ferromagnetic Al-based JJs, specifically Al/AlOx/Al/Py/Al. This layout takes advantage of the capability to integrate the ferromagnetic layer in the junction without affecting the quality of the superconducting electrodes and of the tunnel barrier. The high quality of the devices paves the way for the possible implementation of Al tunnel-ferromagnetic JJs in superconducting quantum circuits. These achievements have promoted the notion of a novel type of qubit incorporating ferromagnetic JJs. This qubit is based on a transmon design featuring a tunnel JJ in parallel with a ferromagnetic JJ inside a SQUID loop capacitively coupled to a superconducting readout resonator. The effect of an external RF field on the magnetic switching processes of ferromagnetic JJs has been also investigated.