Zhiyong Li

Dr. Zhiyong Li

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 January 2023 in Scientific Reports
Verified
Journal Article
Open access
PDF file
JTJuntao Tian
Juntao Tian
LZLili Zhao
Lili Zhao
ZLZhiyong Li
Zhiyong Li
JBJintian Bian
Jintian Bian
QYQing Ye
Qing Ye
RTRongqing Tan
Rongqing Tan
This study presents a high efficiency Ho:YAG laser based on a narrow linewidth tunable 1.91 μm laser. A tunable Tm:YLF laser is the pump source and the wavelength continuous tunability ranges from 1906.04 to 1908.83 nm, corresponding to a linewidth of less than 0.41 nm. The tunable Tm:YLF laser is achieved by changing the operating temperature of the VBG. The output power of the Ho:YAG laser is between 21.04 and 23.53 W and the slope efficiency is between 64.08 and 68.26% at the pump power of 39.8 W. The output power and slope efficiency corresponding to the pump wavelength of 1907.36 nm are 23.53 W and 68.26%, respectively. This study illustrates that fine-tuning the pump wavelength is an effective way to improve the slope efficiency and output power of the Ho:YAG laser at room temperature.

10 February 2025 in Photonics
Verified
Journal Article
Open access
PDF file
SLSongyang Liu
Songyang Liu
WXWenning Xu
Wenning Xu
RTRongqing Tan
Rongqing Tan
FNFangjin Ning
Fangjin Ning
ZLZhiyong Li
Zhiyong Li
Wireless power transmission has become a research hotspot in the field of energy transmission, in which laser power transmission is one of the best methods for long-distance wireless transmission. Since laser has the advantages of high directivity, high energy density and no electromagnetic interference, laser power transmission technology can be applied to the energy supply of unmanned aerial vehicles (UAVs), micro-vehicles, airships and other flight systems. Long-distance laser power transmission can enable high-altitude flight systems to operate continuously without the need to return to the base station for charging, im-proving their operational efficiency. Therefore, high-altitude flight systems have a demand for laser power transmission. However, the commonly used lasers in laser power transmission are semiconductor lasers and fiber lasers, which are only suitable for short-distance transmission of about 1 km. In this paper, taking high-flying UAVs as an example, the transmission efficiency of different lasers used for laser power transmission is analyzed theoretically, and the results show that the diode pumped alkali vapor laser (DPAL) has a high transmission efficiency in high-power long-distance laser power transmission. The transmission efficiency of rubidium lasers which is 1.5 to 4 times that of other lasers can reach 21.94%, which illustrates that DPAL is expected to become a new type of laser source in laser power transmission technology.

10 April 2025 in Photonics
Verified
Journal Article
Open access
PDF file
ZWZiming Wang
Ziming Wang
GWGuochang Wang
Guochang Wang
MLMingkun Liu
Mingkun Liu
SLSicheng Li
Sicheng Li
ZXZhenzhen Xie
Zhenzhen Xie
RTRongqing Tan
Rongqing Tan
Laser annealing plays a significant role in the fabrication of scaled-down semiconductor devices by activating dopant ions and rearranging silicon atoms in ion-implanted silicon wafers, thereby improving material properties. Precise temperature control is crucial in wafer annealing, particularly for repeated processes where repeatability affects uniformity. In this study, we employ a three-dimensional time-dependent thermal simulation model to numerically analyze the multiple static laser annealing processes based on a CO2 laser with a center wavelength of 9.3 μm and a pulse repetition rate of 10 kHz. The heat transfer equation is solved using a multiphysics coupling approach to accurately simulate the effects of different numbers of CO2 laser pulses on wafer temperature rise and repeatability. Additionally, a pyrometer is used to collect and convert the surface temperature of the wafer. Radiation intensity is converted to temperature via Planck’s law for real-time monitoring. Post-processing is performed to fit the measured temperature and the actual temperature into a linear relationship, aiding in obtaining the actual temperature under small beam spots. According to the simulation conditions, a wafer annealing device using a CO2 laser as the light source was independently built for verification, and a stable and uniform annealing effect was realized.

1 March 2020 in Chinese Physics Letters
Verified
Journal Article
Closed access
FNFang-Jin Ning
Fang-Jin Ning
ZLZhiyong Li
Zhiyong Li
RTRong-Qing Tan
Rong-Qing Tan
LHLie-Mao Hu
Lie-Mao Hu
SLSong-Yang Liu
Song-Yang Liu
We demonstrate that the etalon effects of alkali cells can be used as the output coupler of an alkali laser. Based on a rubidium cell with highly parallelized windows, a 2.7 W rubidium laser with optical efficiency of 20.9% and slope efficiency of 31.8% is obtained by adopting unconventional output couplers. Since it has compact configuration and the inner surface of the rubidium cell is uncoated, this may be used in high power laser systems with long lifetimes.

19 January 2024 in IEEE Journal of Quantum Electronics
Verified
Journal Article
Closed access
HWHai Wang
Hai Wang
ZLZhiyong Li
Zhiyong Li
JTJuntao Tian
Juntao Tian
LZLili Zhao
Lili Zhao
RTRongqing Tan
Rongqing Tan
We report a ZnGeP 2 optical parametric oscillator (OPO) with a wide tuning range in the long-wave infrared. The OPO was pumped by a Ho: YLF laser with high peak power, and a resonate cavity with a diffraction grating was used. A tunable long-wave laser with the wavelength of 8.45-11.37 μm was achieved by rotating the grating. Meanwhile, the linewidth was less than 61 nm at the wavelength within the tunable range from 8.45 μm to 9.15 μm. When the wavelength of the idler light was 8.84 μm, the maximum output energy was 52.80 μJ, and the peak power was 6.60 kW. The novel tuning method offers an effective way to realize a tunable long-wave source for stand-off gas concentration detection.

5 February 2024 in Photonics
Verified
Journal Article
Open access
PDF file
ZZZiren Zhu
Ziren Zhu
YLYu Liu
Yu Liu
JYJinghan Ye
Jinghan Ye
JTJuntao Tian
Juntao Tian
TWTianjian Wan
Tianjian Wan
XSXinjun Su
Xinjun Su
Laser pulse amplification by a high-pressure CO2 amplifier in the long-wave infrared (LWIR) spectral range is a feasible technology for strong-field physics research. Crystals such as ZnGeP2 (ZGP) have high nonlinear coefficients and transmittance in the LWIR region, with spectral widths of generated pulses closely matching the gain spectrum of high-pressure CO2 amplifiers. Therefore, ZGP optical parametric oscillation (OPO) may allow higher-efficiency energy extraction in amplifiers, improving the output characteristics of LWIR amplification systems. In this study, the gain measurement of ZGP OPO pulses amplified by a high-pressure CO2 amplifier was carried out for the first time. Single-detector acquisition was utilized to achieve a unified sensor responsivity, and a laser signal-triggered function generator was used to synchronize the seed pulse and amplifier. Six-pass amplification was performed successively, yielding an amplification factor of 4.5 for the peak power and a maximum coefficient of 0.42% cm−1 for the small-signal gain. The gain and loss effect during small-signal amplification were discussed. The potential capability of acquiring ultra-short pulses with ZGP OPO pulses was also explored with the FFT function of MATLAB software.