Igor de Mesquita Figueredo

Ms. Igor de Mesquita Figueredo


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 November 2023 in Lubricants
Verified
Journal Article
Open access
PDF file
MNMaria Melo Neta
Maria Melo Neta
GLGustavo R. R. Lima
Gustavo R. R. Lima
PTPhilipe Tavares
Philipe Tavares
IFIgor de Mesquita Figueredo
Igor de Mesquita Figueredo
WRWeslley da S. Rocha
Weslley da S. Rocha
Francisco Murilo Tavares de LunaFrancisco Murilo Tavares de Luna
Francisco Murilo Tavares de Luna
In this study, the thermo-oxidative stability and tribological behavior of bio-based lubricant samples synthesized from castor oil using isoamyl alcohol were evaluated. Initially, the compositional and physicochemical properties of the obtained samples were assessed using the 1H NMR, FTIR and ASTM methods. Oxidative stability of the samples was evaluated using the Rancimat method at 110 °C under air flow. The final biolubricant sample (BL2), obtained after esterification, epoxidation and oxirane rings opening reactions, presented an oxidation stability time (OST) of 14.3 h. The thermal stability was also evaluated by thermogravimetry (TG) from the mass variations under inert and oxidative atmosphere. BL2 showed higher thermal stability compared to the other samples, demonstrating higher decomposition temperatures in both inert (339.04 °C) and oxidative (338.47 °C) atmospheres, for a mass loss of 50%. The tribological properties of the samples were evaluated using a four-ball tribometer configuration. The BL1 and BL2 samples exhibited lower friction coefficients than the mineral oil sample (MOS) by 21.5% and 43.1%, respectively. Regarding wear, the observed wear scar diameter (WSD) was also lower in BL1 and BL2 compared to MOS by 5.2% and 40.4%, respectively. The results of the tribological evaluation suggest that both samples (BL1 and BL2) have promising potential for applications in lubricating machines.

22 December 2022 in Journal of Energy and Power Technology
Verified
Journal Article
Open access
PDF file
LMLara T. C. Mota
Lara T. C. Mota
IFIgor de Mesquita Figueredo
Igor de Mesquita Figueredo
Francisco Murilo Tavares de LunaFrancisco Murilo Tavares de Luna
Francisco Murilo Tavares de Luna
Rodrigo Silveira VieiraRodrigo Silveira Vieira
Rodrigo Silveira Vieira
CJCélio Loureiro Cavalcante Jr.
Célio Loureiro Cavalcante Jr.
Maria Alexsandra de Sousa RiosMaria Alexsandra de Sousa Rios
Maria Alexsandra de Sousa Rios
In this study, the oxidative stability of the cottonseed oil biodiesel (CB) and soybean oil biodiesel (SB) was investigated by two methodologies, Rancimat and Differential Scanning Calorimetry (DSC), using samples fresh and aged (mid-term storage condition (100 days)). The biodiesel samples were synthesized by transesterification and characterized by specific mass, kinematic viscosity, acidity value, ester content, viscosity index, and peroxide value. The activation energy (Ea), Arrhenius pre-exponential factor (Z), reaction order (n), and reaction rate at constant temperature (k(T)) were calculated by Borchardt and Daniels method. The results showed that oxidation affected the physicochemical properties of the biodiesel samples, especially, acidity (mg KOH/g), peroxide value (meq/1000 g), and induction period, with a decrease of around 55% for CB and 29% for SB. For kinetic parameters, the k(T) of both aged samples presented the highest values, with an increase of around 314% for SB. It was also observed that the rate constants increased with decreasing values of the induction period, in agreement with the current literature. According to the evaluation, the Borchardt and Daniels method can be recommended for a quick assessment of the biodiesel oxidation kinetic parameters.

20 August 2025 in Processes
Verified
Journal Article
Open access
PDF file
BSBruna Araújo Sousa
Bruna Araújo Sousa
IFIgor de Mesquita Figueredo
Igor de Mesquita Figueredo
DBDébora Brito
Débora Brito
MLMauricio Dorneles Lima
Mauricio Dorneles Lima
ESEva Sousa
Eva Sousa
Maria Alexsandra de Sousa RiosMaria Alexsandra de Sousa Rios
Maria Alexsandra de Sousa Rios
Macauba is a versatile palm and has been explored in various sectors due to its ability to produce oils, proteins, energy, and biofuels. This paper presents the extraction, refining, and characterization of the macauba kernel oil, the synthesis of biodiesel, and an evaluation of the density and viscosity of its blends with mineral diesel, ranging from B15 to B20. Conversion was determined using the integral areas of the 1H NMR spectrum for the FAME methyl ester (3.62, -CH3) and FAME carbonyl (2.26, -COOCH2). Predictions of the key inputs required for the extraction and degumming of the macauba kernel oil, as well as for the biodiesel production, are also presented. These results provide valuable insights into diesel-biodiesel blends exceeding 14% (vol.) of biodiesel, thereby contributing to the expansion of the biofuels industry.

19 September 2023 in Preprints.org
Verified
Preprint
Open access
PDF file
MNMaria Melo Neta
Maria Melo Neta
GLGustavo R. R. Lima
Gustavo R. R. Lima
PTPhilipe Tavares
Philipe Tavares
IFIgor de Mesquita Figueredo
Igor de Mesquita Figueredo
WRWeslley da S. Rocha
Weslley da S. Rocha
Francisco Murilo Tavares de LunaFrancisco Murilo Tavares de Luna
Francisco Murilo Tavares de Luna
Castor oil may be differentiated from other non-edible vegetable oils because of its main composition of hydroxylated fatty acids. Ricinoleic acid comprises 80–90% wt. of fatty acids in castor oil (Ricinus communis). In this study, the thermo-oxidative stability and tribological behavior of bio-based lubricant samples synthesized from castor oil using isoamyl alcohol were evaluated. Initially, the compositional and physicochemical properties of the obtained samples were assessed using 1H NMR, FTIR, and ASTM methods. Oxidative stability of the samples was evaluated using Rancimat method at 110 °C under air flow. The final biolubricant sample (BL2), obtained after esterification, epoxidation, and oxirane rings opening reactions, presented an oxidation stability time (OST) of 14.3 h. The thermal stability was also evaluated by thermogravimetry (TG) from the mass variations under inert and oxidative atmosphere. BL2 showed higher thermal stability compared to the other samples, demonstrating higher decomposition temperatures in both inert (339.04 °C) and oxidative (338.47 °C) atmospheres, for a mass loss of 50%. The tribological properties of the samples were evaluated using a four-ball tribometer configuration. The BL1 and BL2 samples exhibited lower friction coefficients than the mineral oil sample (MOS) by 21.5% and 43.1%, respectively. Regarding wear, the observed wear scar diameter (WSD) was also lower in BL1 and BL2 compared to MOS by 5.2% and 40.4%, respectively. The results of the tribological evaluation suggest that both samples obtained in this study have promising potential for applications in lubricating machines and mechanical systems.