In this study, the thermo-oxidative stability and tribological behavior of bio-based lubricant samples synthesized from castor oil using isoamyl alcohol were evaluated. Initially, the compositional and physicochemical properties of the obtained samples were assessed using the 1H NMR, FTIR and ASTM methods. Oxidative stability of the samples was evaluated using the Rancimat method at 110 °C under air flow. The final biolubricant sample (BL2), obtained after esterification, epoxidation and oxirane rings opening reactions, presented an oxidation stability time (OST) of 14.3 h. The thermal stability was also evaluated by thermogravimetry (TG) from the mass variations under inert and oxidative atmosphere. BL2 showed higher thermal stability compared to the other samples, demonstrating higher decomposition temperatures in both inert (339.04 °C) and oxidative (338.47 °C) atmospheres, for a mass loss of 50%. The tribological properties of the samples were evaluated using a four-ball tribometer configuration. The BL1 and BL2 samples exhibited lower friction coefficients than the mineral oil sample (MOS) by 21.5% and 43.1%, respectively. Regarding wear, the observed wear scar diameter (WSD) was also lower in BL1 and BL2 compared to MOS by 5.2% and 40.4%, respectively. The results of the tribological evaluation suggest that both samples (BL1 and BL2) have promising potential for applications in lubricating machines.
The energetic potential of the seed shell of the Neem plant (Azadirachta indica) was investigated using proximate analysis, Higher Heating Value (HHV), thermal analysis (TG-DTG and DSC) in inert and oxidative atmospheres, and X-ray fluorescence (XRF). The results of ash (3.80% ± 0.44), volatile matter (81.76% ± 1.30), fixed carbon (14.44% ± 1.74), and estimated HHV (18.791 MJ/kg: average value) are compatible with other biomasses already used as fuels in the bioenergy industry. Thermograms showed three main degradation events in synthetic air and two in nitrogen, attributed to the moisture, release of volatile materials, and decomposition of hemicellulose, cellulose, and lignin. The elements positively detected by the XRF were Ca, K, S, P, Fe, Ti, Zn, Rb, and Sr.
Research on and the development of bio-based lubricants as alternatives to mineral-based lubricants have been encouraged worldwide owing to environmental concerns and the possible depletion of oil reserves. This study explored the use of grape seed oil (GSO), a byproduct of wine production, as a raw material for biolubricant synthesis. GSO contains a triglyceride molecule rich in unsaturated fatty acids, which is ideal for obtaining biolubricants. This study addresses the technical challenges of converting GSO into a lubricant by synthesizing methyl esters (FAME) via transesterification with 2-ethylhexanol to produce a biolubricant (BL) sample. The obtained products were characterized using Fourier-transform infrared spectroscopy and nuclear magnetic resonance spectroscopy to confirm the conversion of the molecules. The density, kinematic viscosity, and viscosity index were determined using the parameters established by ASTM. The tribological characteristics of BL were evaluated using a four-ball tribometer configuration. BL exhibited physicochemical characteristics comparable with those of an ISO VG 10 lubricant, a friction coefficient (FC) 40.82% lower than that of a hydrotreated mineral oil sample, and a smoother wear surface. These results indicate that the polarity of the ester functional group was efficient in producing a protective film on metal surfaces.
8 January 2025 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Interest in replacing petroleum-based lubricants with bio-based alternatives is driven by growing demand for lubricants, in contrast to a decreasing supply of products derived from fossil resources, coupled with environmental concerns. Biolubricants offer several advantages over conventional petroleum-based lubricants, such as biodegradability and renewability. Researchers have been seeking solutions for these challenges over the years, employing various approaches, including the use of different raw materials, chemical modifications, and different types of additives. This review evaluates a total of 504 articles published between 2010 and 2025 in the Scopus database, with the help of RStudio, using the bibliometrix package. The objective is to provide an integrated bibliometric and systematic analysis, presenting the research landscape on the tribological properties of biolubricants, which may contribute to the development of novel investigation initiatives in the field. The main thematic trends, researchers, journals, and most active countries and institutions have been evaluated. Additionally, the most cited studies, recent advances and existing gaps are presented and discussed.