In recent years, energy challenges such as grid congestion and imbalances have emerged from conventional electric grids. Furthermore, the unpredictable nature of these systems poses many challenges in meeting various users’ demands. The Battery Energy Storage System is a potential key for grid instability with improved power quality. The present study investigates the global trend towards integrating battery technology as an energy storage system with renewable energy production and utility grid systems. An extensive review of battery systems such as Lithium-Ion, Lead–Acid, Zinc–Bromide, Nickel–Cadmium, Sodium–Sulphur, and the Vanadium redox flow battery is conducted. Furthermore, a comparative analysis of their working principles, control strategies, optimizations, and technical characteristics is presented. The review findings show that Lead–Acid, Lithium-Ion, Sodium-based, and flow redox batteries have seen increased breakthroughs in the energy storage market. Furthermore, the use of the BESS as an ancillary service and control technique enhances the performance of microgrids and utility grid systems. These control techniques provide potential solutions such as peak load shaving, the smoothing of photovoltaic ramp rates, voltage fluctuation reduction, a large grid, power supply backup, microgrids, renewable energy sources time shift, spinning reserve for industrial consumers, and frequency regulation. Conclusively, a cost summary of the various battery technologies is presented.

Power systems have been going through a barrage of transformations due to the recent developments in the field, such as deregulation and restructuring of the electric power supply chain, the proliferation of distributed generation (DG), and advancements in information and communications technologies. These have significantly impacted the approach to the planning, design, and operation of active distribution networks or systems. Due to this constant change, the system has become more complex to plan, maintain, and control. In this paper, the benefits and challenges of active distribution systems relative to traditional passive and active distribution systems are evaluated and investigated while the management and operational characteristics of demand-side resources in active distribution systems (ADS) are studied. In a typical ADS, there exist several vulnerabilities and threats that eventually pose a challenge in the control and automation of substations. These vulnerabilities and threats are reviewed, and potential mitigation measures are suggested. Also in this paper, the communication technologies and their implementation in terms of control and automation capabilities in active distribution networks are also studied. From this work, it is concluded that communication technologies play an integral role in the realization of more active distribution networks and that the Internet of Energy (IoE) is a major player in ADS in the reduction of faults due to human error, fast responses, and improving the stability of power supply. Cyber threats are also and will still be a continuous challenge in smart metering technologies and in substation automation systems (SAS), which will require frequent evaluation and mitigation measures so as not to prevent the power supply system from collapsing.

Battery energy storage systems (BESSs) and plug-in hybrid electric vehicles (PHEVs) are essential for microgrid operations to be financially viable. PHEVs can serve as mobile storage devices, storing excess energy during times of low demand and delivering it during times of high demand. By offering reliable on-site energy storage, BESSs improve cost efficiency by allowing the microgrid to store cheap, off-peak electricity and release it when prices increase. To minimize generation costs and alleviate grid stress during periods of high demand, load-shifting policies shift inelastic loads to off-peak hours when energy prices are lower. When combined, these tactics support dependable, affordable, and effective microgrid management. A recently developed RIME algorithm is used as the optimization tool to reduce the total operating cost (TOC) of an MG system for three cases and three situations. The cases emphasize a modified load demand style influenced by the optimal load-shifting method (OLSM) and order characteristics load-shifting policy (OCLSP), whereas the situations refer to the inclusion of ESS in the MG system. The TOC decreased from $2624 without ESS to $2611 and $2331 with PHEVs and BESSs, respectively. These costs were further reduced to $1192, $1162, and $1147, respectively, when OLSM was implemented to restructure the base load demand. Additionally, a balance between a minimal TOC and carbon emission was obtained when an OLSM-based load demand model was used with BESSs. The RIME algorithm outperformed many recently developed algorithms and is consistent and robust, yielding better quality solutions.

The reliability and security of an electric power supply have become pivotal to the proper functioning of modern society. Traditionally, the electric power supply system has been designed with the objective of being able to adequately meet present and future demand, with efforts to maintain supply reliability being focused primarily on the supply side. Over the decades, however, the value of demand-side management—efforts focused on enhancing the efficient and effective use of electricity in support of the power system and customer needs—has been widely acknowledged as being able to play a greater role in ensuring that the key objectives of power system operation are satisfied. This article presents a study of demand-side management and opportunities for incorporating it into network planning as an effective means of addressing supply capacity constraints in the South African electric grid. The main drivers, benefits and potential barriers to the effective implementation of demand-side management are examined, along with the main enabling technologies. The key finding of the study is that the effective integration of demand-side management into network planning requires a shift from the traditional network planning approach to one that is more suited to fully exploiting the flexibility resources available on the demand side of the network.

Power systems have been going through a barrage of transformations due to the recent developments in the field, such as deregulation and restructuring of the electric power supply chain, the proliferation of distributed generation (DG), and advancements in information and communications technologies. These have significantly impacted the approach to the planning, design, and operation of active distribution networks or systems. Due to this constant change, the system has become more complex to plan, maintain, and control. In this paper, the benefits, and challenges of active distribution systems relative to traditional passive and active distribution systems are evaluated and investigated while the management and operational characteristics of demand-side resources in Active Distribution Systems (ADS) are studied. In a typical ADS, there exist several vulnerabilities and threats that eventually pose a challenge in the control and automation of substations. These vulnerabilities and threats are reviewed, and potential mitigation measures are suggested. Also in this paper, the communication technologies, and their implementation in terms of control and automation capabilities in active distribution networks are also studied. From this work, it is concluded that communication technologies play an integral role in the realization of a more active distribution networks and that the internet of energy (IoE) is a major player in ADS in the reduction of faults due to human error, fast responses, and improving the stability of power supply. Cyber threats are also and will still be a continuous challenge in smart metering technologies and in substation automation systems (SAS) which will require frequent evaluation and mitigation measures so as not to prevent the power supply system from collapsing.