A biosensor for bovine serum albumin (BSA) detection by graphene oxide (GO) functionalized micro-taped long-period fiber grating (GMLPG) was demonstrated. The amide bond connected between the GO and BSA enabled the BSA to attach onto the fiber surface, which changed the effective refractive index of the cladding mode and characterized the concentration of the BSA. This real-time monitoring system demonstrated a sensing sensitivity of 1.263 nm/(mg/mL) and a detection limit of 0.043 mg/mL. Moreover, it illustrated superior measurement performance of higher sensitivity in the presence of glucose and urea as the interference, which showed static sensitivities of ∼1.476 nm/(mg/mL) and 1.504 nm/(mg/mL), respectively. The proposed GMLPG demonstrated a great potential for being employed as a sensor for biomedical and biochemical applications.

We report a single-wavelength tunable mode-locked fiber laser. The single wavelength can be tuned from 1537.49 nm to 1608.06 nm by introducing a Sagnac loop filter. As far as we know, this is the widest single-wavelength tuning range achieved in an erbium-doped mode-locked all-fiber laser based on nonlinear amplifying loop mirror (NALM). The laser’s pulse width changes from 549 fs to 808 fs throughout the tuning process, the maximum average output power is 5.72 mW, and the single-pulse energy is 0.34 nJ at a central wavelength of 1556.53 nm. This laser source can serve as an efficient tool for applications that require a broad tunability range. The combination of femtosecond pulses and extensive wavelength tuning capabilities makes this laser system highly valuable in fields such as fiber optic communications, spectroscopy, sensing, and other applications that benefit from ultrafast and tunable laser sources.

An all-optical modulator of reduced-graphene-oxide coated D-shape fiber (RGODF) structure, utilizing a convenient and controllable evanescent-field-induced deposition method, was designed in this study. By using the pump pulse at 980 nm, the signal light at 1550 nm was modulated with the rate of 50 kHz, and the maximum modulation depth of 8 dB was obtained using this device. Furthermore, this kind of modulator features with strong mechanical stability, ease of fabrication, low-cost, and compatible with optical fiber systems, which implies great potential in photonics applications such as all-optical switching and all-optical communications.

In this work, we demonstrated a kind of flexibly monolithic saturable absorber (SA) with GaAs nanowires (NWs) on polyimide (PI) plastic substrate for broadband optical modulation at 1.0 and 1.5 µm, separately. The monolithic SA sample was prepared by the metalorganic vapor phase epitaxy (MOVPE) method. The crystal structure and element analysis were examined carefully by high-resolution scanning transmission electron microscopy (HRSTEM) and energy-dispersive X-ray spectroscopy (EDX). We observed a high-density distribution of NWs on the flexible substrate by scanning electron microscopy (SEM). In addition, linear and nonlinear optical properties of the sample were examined by testing the photoluminescence and absorption properties, which showed its potential application as an optical switch due to the pure semiconducting properties. After the characterizations, we experimentally demonstrated this monolithic SA for laser modulation at 1.0 and 1.5 µm, which yielded the minimum optical pulse widths of 1.531 and 6.232 µs, respectively. Our work demonstrated such a kind of monolithic flexible NW substrate-integrated device used for broadband optical modulation, which not only eased the integration process of NWs onto the fiber endface, but also proved the potential of easily integrating with more semiconducting nanomaterials (e.g., graphene, MoS₂, …) to realize monolithic active flexible photonic systems, such as a microscale phase modulator, delay-line, and so on, paving an easy avenue for the development of both active and flexible photonic devices.