In this work, we have studied the temperature dependence of a cholesteric liquid-crystal laser coupled to an optical fiber, with a view towards optical fiber sensor applications. To stabilize the laser emission, we developed a procedure to align the liquid crystal placed in the fiber. Unexpected oscillations in the laser emission were observed as the temperature was varied, which can be understood in terms of the competition between bulk and surface anchoring torques.
Third-order nonlinearity one order of magnitude larger than silica is measured in bismuth-borate glasses presenting a fast response . The results for the sign and magnitude of the nonlinearity were obtained using a combination of the eclipse scan with thermal nonlinearity managed scan, whereas the Kerr shutter technique was employed to obtain the electronic time response of the nonlinearity, all performed with repetition rate pulses at . Conventional scans in the picosecond regime at 532 and were also independently performed, yielding the values of the third-order nonlinear susceptibilities at those wavelengths. The results obtained for the femtosecond response, enhanced third-order nonlinearity of this glass (with respect to silica), place this glass system as an important tool in the development of photonics devices. Electro-optical modulators, optical switches, and frequency converters are some of the applications using second-order nonlinear properties of the Bi-glass based on the rectification model.
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
The effect of hydrostatic pressure on the waveguiding properties of high birefringence photonic crystal fibers (HiBi PCF) is evaluated both numerically and experimentally. A fiber design presenting form birefringence induced by two enlarged holes in the innermost ring defining the fiber core is investigated. Numerical results show that modal sensitivity to the applied pressure depends on the diameters of the holes, and can be tailored by independently varying the sizes of the large or small holes. Numerical and experimental results are compared showing excellent agreement. A hydrostatic pressure sensor is proposed and demonstrated using an in-fiber modal interferometer where the two orthogonally polarized modes of a HiBi PCF generate fringes over the optical spectrum of a broad band source. From the analysis of experimental results, it is concluded that, in principle, an operating limit of 92 MPa in pressure could be achieved with 0.0003% of full scale resolution.