Md Rafsun Rafsun Jani

Mr. Md Rafsun Rafsun Jani

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 January 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
TITohidul Islam
Tohidul Islam
MJMd Rafsun Rafsun Jani
Md Rafsun Rafsun Jani
AIAzmain Faek Islam
Azmain Faek Islam
KSKazi Md. Shorowordi
Kazi Md. Shorowordi
SCShaestagir Chowdhury
Shaestagir Chowdhury
SASaquib Ahmed
Saquib Ahmed
With the perovskite-on-Si tandem solar technology at the onset of commercialization, it becomes imperative to tackle the toxicity concern of Pb in the perovskite structure. This study utilizes solar cell capacitance simulator (SCAPS) simulation software to investigate a tandem device with the crystalline Si (c-Si; bandgap: 1.12 eV) bottom cell in a mechanically stacked configuration with the stable and nontoxic CsSn 0.5 Ge 0.5 I 3 (bandgap: 1.5 eV) as the top cell active layer. The device performance has been compared against that of a traditional tandem solar device setup utilizing MAPbI 3 (bandgap: 1.55 eV) as the top cell active layer. Simulation results reveal power conversion efficiency (PCE) values of standalone CsSn 0.5 Ge 0.5 I 3 , MAPbI 3 , and c-Si cells to be 7.45%, 20.01%, and 25.95%, respectively, all in good agreement with published experimental results. The current matching condition between the top perovskite cell and the bottom c-Si cell has been probed through variation of perovskite layer thickness, yielding optimized thickness values for CsSn 0.5 Ge 0.5 I 3 and MAPbI 3 to be 365 and 225 nm, respectively. A tandem device with CsSn 0.5 Ge 0.5 I 3 -on-Si showcases a PCE of 28.53% ( ${V}_{\mathrm{oc}}$ : 1.72 V; ${J}_{\mathrm{sc}}$ : 20.02 mA/cm 2 ; and FF: 83.74%) compared with an MAPbI 3 -on-Si device yielding a PCE of 32.29% ( ${V}_{\mathrm{oc}}$ : 1.88 V; ${J}_{\mathrm{sc}}$ : 19.969 mA/cm 2 ; and FF: 85.99%). The results and analyses of this study highlight the feasibility of utilizing nontoxic materials, such as CsSn 0.5 Ge 0.5 I 3 , to attain high tandem device PCE values.

1 November 2020 in Computational Materials Science
Verified
Journal Article
Closed access
TITohidul Islam
Tohidul Islam
MJMd Rafsun Rafsun Jani
Md Rafsun Rafsun Jani
SASyed Muhammad Al Amin
Syed Muhammad Al Amin
KSKazi Md Shorowordi
Kazi Md Shorowordi
SNSadiq Shahriyar Nishat
Sadiq Shahriyar Nishat
SASaquib Ahmed
Saquib Ahmed

1 April 2021 in Optik
Verified
Journal Article
Closed access
TITohidul Islam
Tohidul Islam
MJMd Rafsun Rafsun Jani
Md Rafsun Rafsun Jani
KSKazi Md Shorowordi
Kazi Md Shorowordi
ZHZameer Hoque
Zameer Hoque
AGAli Mucteba Gokcek
Ali Mucteba Gokcek
SASaquib Ahmed
Saquib Ahmed

21 October 2023 in Energies
Verified
Journal Article
Open access
PDF file
ASAhmed Sikder
Ahmed Sikder
WGWilliam Ghann
William Ghann
MJMd Rafsun Rafsun Jani
Md Rafsun Rafsun Jani
TITohidul Islam
Tohidul Islam
SASaquib Ahmed
Saquib Ahmed
U Jamal Uddin
Jamal Uddin
In this report, natural dyes extracted from three different, black-colored fruits were used as photosensitizers for the construction of dye-sensitized solar cells (DSSCs). The natural dyes were extracted from the dark-colored peels of jamun (also known as Indian black plum), black plum, and blackberry fruit. These natural dyes contain polyphenolic compounds—most prominently anthocyanins—which interact strongly with titanium dioxide (TiO2) semiconductors and accordingly enhance the efficiency of DSSCs. The natural dyes extracted from the various fruits were characterized utilizing UV-Vis and fluorescence spectroscopy. The interaction between the dyes and TiO2 was monitored with FTIR and Raman spectroscopy. The fabricated DSSCs were characterized via current–voltage measurements and electrochemical impedance analysis. DSSCs fabricated with jamun produced the highest efficiency of 1.09% with a short-circuit current of 7.84 mA/cm2, an open-circuit voltage of 0.45 V, and a fill factor of 0.31. The efficiencies of the DSSCs from black plum and blackberry were 0.55% and 0.38%, respectively. The flow of charge occurring at the interfaces between the natural dye and the TiO2 layers were investigated using electrochemical impedance spectroscopy (EIS). To the best of our knowledge, this study is the first to directly compare three distinct types of black DSSCs. Computation analysis was also carried out utilizing SCAPS-1D software (version 3.3.07), which revealed how the type of defects in the devices impacts their performance.