With the perovskite-on-Si tandem solar technology at the onset of commercialization, it becomes imperative to tackle the toxicity concern of Pb in the perovskite structure. This study utilizes solar cell capacitance simulator (SCAPS) simulation software to investigate a tandem device with the crystalline Si (c-Si; bandgap: 1.12 eV) bottom cell in a mechanically stacked configuration with the stable and nontoxic CsSn 0.5 Ge 0.5 I 3 (bandgap: 1.5 eV) as the top cell active layer. The device performance has been compared against that of a traditional tandem solar device setup utilizing MAPbI 3 (bandgap: 1.55 eV) as the top cell active layer. Simulation results reveal power conversion efficiency (PCE) values of standalone CsSn 0.5 Ge 0.5 I 3 , MAPbI 3 , and c-Si cells to be 7.45%, 20.01%, and 25.95%, respectively, all in good agreement with published experimental results. The current matching condition between the top perovskite cell and the bottom c-Si cell has been probed through variation of perovskite layer thickness, yielding optimized thickness values for CsSn 0.5 Ge 0.5 I 3 and MAPbI 3 to be 365 and 225 nm, respectively. A tandem device with CsSn 0.5 Ge 0.5 I 3 -on-Si showcases a PCE of 28.53% ( ${V}_{\mathrm{oc}}$ : 1.72 V; ${J}_{\mathrm{sc}}$ : 20.02 mA/cm 2 ; and FF: 83.74%) compared with an MAPbI 3 -on-Si device yielding a PCE of 32.29% ( ${V}_{\mathrm{oc}}$ : 1.88 V; ${J}_{\mathrm{sc}}$ : 19.969 mA/cm 2 ; and FF: 85.99%). The results and analyses of this study highlight the feasibility of utilizing nontoxic materials, such as CsSn 0.5 Ge 0.5 I 3 , to attain high tandem device PCE values.
In this research, solar cell capacitance simulator-one-dimensional (SCAPS-1D) software was used to build and probe nontoxic Cs-based perovskite solar devices and investigate modulations of key material parameters on ultimate power conversion efficiency (PCE). The input material parameters of the absorber Cs-perovskite layer were incrementally changed, and with the various resulting combinations, 63,500 unique devices were formed and probed to produce device PCE. Versatile and well-established machine learning algorithms were thereafter utilized to train, test, and evaluate the output dataset with a focused goal to delineate and rank the input material parameters for their impact on ultimate device performance and PCE. The most impactful parameters were then tuned to showcase unique ranges that would ultimately lead to higher device PCE values. As a validation step, the predicted results were confirmed against SCAPS simulated results as well, highlighting high accuracy and low error metrics. Further optimization of intrinsic material parameters was conducted through modulation of absorber layer thickness, back contact metal, and bulk defect concentration, resulting in an improvement in the PCE of the device from 13.29 to 16.68%. Overall, the results from this investigation provide much-needed insight and guidance for researchers at large, and experimentalists in particular, toward fabricating commercially viable nontoxic inorganic perovskite alternatives for the burgeoning solar industry.
1 November 2020 in Computational Materials Science