Maarten Vlaswinkel

Mr. Maarten Vlaswinkel


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 April 2024 in Energies
Verified
Journal Article
Open access
PDF file
MVMaarten Vlaswinkel
Maarten Vlaswinkel
FWFrank Willems
Frank Willems
Cylinder-pressure-based control is a key enabler for advanced pre-mixed combustion concepts. In addition to guaranteeing robust and safe operation, it allows for cylinder pressure and heat release shaping. This requires fast control-oriented combustion models. Over the years, mean-value models have been proposed that can predict combustion metrics (e.g., gross indicated mean effective pressure (IMEPg), or the crank angle where 50% of the total heat is released (CA50)) or models that predict the full in-cylinder pressure. However, these models are not able to capture cycle-to-cycle variations. The inclusion of the cycle-to-cycle variations is important in the control design for combustion concepts, like reactivity-controlled compression ignition, that can suffer from large cycle-to-cycle variations. In this study, the in-cylinder pressure and cycle-to-cycle variations are modelled using a data-based approach. The in-cylinder conditions and fuel settings are the inputs to the model. The model combines principal component decomposition and Gaussian process regression. A detailed study is performed on the effects of the different hyperparameters and kernel choices. The approach is applicable to any combustion concept, but is most valuable for advance combustion concepts with large cycle-to-cycle variation. The potential of the proposed approach is successfully demonstrated for a reactivity-controlled compression ignition engine running on diesel and E85. The average prediction error of the mean in-cylinder pressure over a complete combustion cycle is 0.051 bar and of the corresponding mean cycle-to-cycle variation is 0.24 bar2. This principal-component-decomposition-based approach is an important step towards in-cylinder pressure shaping. The use of Gaussian process regression provides important information on cycle-to-cycle variation and provides next-cycle control information on safety and performance criteria.

11 February 2026 in Control Engineering Practice
Verified
Journal Article
Open access
MVMats Versmissen
Mats Versmissen
MVMaarten Vlaswinkel
Maarten Vlaswinkel
FWFrank Willems
Frank Willems

24 September 2026 in Control Engineering Practice
Verified
Journal Article
Open access
MVMaarten Vlaswinkel
Maarten Vlaswinkel
DADuarte Antunes
Duarte Antunes
FWFrank Willems
Frank Willems

18 February 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
LELars Eriksson
Lars Eriksson
RHRobin Holmbom
Robin Holmbom
MJMax Johansson
Max Johansson
MSMatteo Spano
Matteo Spano
Manfredi VillaniManfredi Villani
Manfredi Villani
CSChristian Simone
Christian Simone
For commercial electric vehicles tasked with heavy-duty freight, fuel cell hybridization is considered as a potential solution for maintaining the driving range and refuelling times of diesel engines. However, with fuel cells and hybridization in general comes a number of technological challenges, of which durability and fuel efficiency—factors depending on a well-performing control strategy—are regarded as critical. Therefore, to facilitate research in fuel cell hybrid vehicle controls, a comprehensive benchmark problem was formulated for a fuel cell electric truck, and was used in a competition at the 2023 IFAC World Congress. Six solutions from universities all over the world were submitted and compared for a number of driving missions. While all solutions were unique, some similarities were found in the various approaches: multi-layered control structures, multi-objective cost functions, and spatial domain formulations. The competition also highlighted the difficulty of the challenge:no solution considered all aspects of the benchmark problem, and most were vulnerable to disturbances. The simulation platform used in the benchmark is available as open source. For researchers and industry professionals in the field of fuel cell vehicle controls, the provided solutions may serve as starting points and inspiration for new developments.

7 March 2024 in arXiv
Verified
Preprint
Open access
PDF file
MVMaarten Vlaswinkel
Maarten Vlaswinkel
FWFrank Willems
Frank Willems
Cylinder pressure-based control is a key enabler for advanced pre-mixed combustion concepts. Besides guaranteeing robust and safe operation, it allows for cylinder pressure and heat release shaping. This requires fast control-oriented combustion models. Over the years, mean-value models have been proposed that can predict combustion measures (e.g., Gross Indicated Mean Effective Pressure, or the crank angle where 50% of the total heat is released) or models that predict the full in-cylinder pressure. However, these models are not able to capture cyclic variations. This is important in the control design for combustion concepts, like Reactivity Controlled Compression Ignition, that can suffer from large cyclic variations. In this study, the in-cylinder pressure and cyclic variation are modelled using a data-based approach. The model combines Principle Component Decomposition and Gaussian Process Regression. A detailed study is performed on the effects of the different hyperparameters and kernel choices. The approach is applicable to any combustion concept, but most valuable for advance combustion concepts with large cyclic variation. The potential of the proposed approach is demonstrated for an Reactivity Controlled Compression Ignition engine running on Diesel and E85. The prediction quality of the evaluated combustion measures has an overall accuracy of 13.5% and 65.5% in mean behaviour and standard deviation, respectively. The peak-pressure rise-rate is traditionally hard to predict, in the proposed model it has an accuracy of 22.7% and 96.4% in mean behaviour and standard deviation, respectively. This Principle Component Decomposition-based approach is an important step towards in-cylinder pressure shaping. The use of Gaussian Process Regression provides important information on cyclic variation and provides next-cycle controls information on safety and performance criteria.