In this paper, a 2 pole, 4 kW, 6 inches diameter line start synchronous reluctance machine (LS-SynRM) as a submersible water pump motor is designed and optimized with a new oval shaft structure. The aim is to improve the machine performance by widening the flux path on the rotor via narrowing down the shaft on the q-axis. This way a wider d-axis flux path is obtained, and accordingly, the d-axis inductance, the saliency ratio L d∕ L q, and the inductance difference L d– L q are increased. First, a set of structural analyses is carried out on a 7-flux barrier rotor in 3 stages: modal, harmonic, and static structural analyses. According to analysis results, the safe limit for the shaft size reduction is determined as 8 mm to avoid excessive deformations and undesired vibrations due to resonance. Later, the machine is optimized using Multi-Objective Differential Evolution (MODE) algorithm with a narrower shaft. The quality of the Pareto front solutions shows that the oval shaft machine is superior to the circular shaft machine in terms of efficiency, motor mass, and torque ripple. The maximum recorded efficiency improvement for the same size LS-SynRM is 4 points and the same size commercial induction machine is around 20 points.
This research examines how fluid damping loss affects the operation of a two-pole, 5.5 HP (4 kW) induction machine (IM) within the context of different slot opening configurations developed for downhole water pump applications. Since these motors operate with their cavities filled with fluid, the variations in fluid viscosity and density, compared to air, result in the occurrence of damping losses. Furthermore, this loss can be attributed to the motor’s stator and rotor surface geometry, as the liquid within the motor cavity moves unrestrictedly within the motor housing. This study involves the examination of the damping loss in a 24-slot IM under different stator slot indentations. The investigation utilizes computational fluid dynamics (CFD) finite element analysis (FEA) and is subsequently validated through experiments. The aim of this work is to emphasize the significance of fluid damping loss in submerged machines. Results reveal that the damping loss exceeds 8% of the motor output power when the stator surface has indentations, and it diminishes to 3.2% of the output power when a custom wedge structure is employed to eliminate these surface indentations.
The shaft eddy currents cause a significant saturation in two-pole induction machines (IMs) as they generate an opposing field and repulse the main flux, thus tightening the flux path. This results in inaccurate performance estimations with the magnetizing inductance measured in no-load conditions when the machine is loaded. This article presents a modified IM equivalent circuit considering the rotor back iron saturation effects caused by the solid shaft eddy currents using experimental measurements and recursive parameter estimation techniques. The classical equivalent circuit (CEC) parameters are determined with the standard test techniques followed by the parameter estimation of the newly introduced modified equivalent circuit (MEC) parameters. The proposed modified equivalent circuit is benchmarked with CEC and finite element analysis (FEA) simulations with and without considering eddy effects. The proposed MEC model and the FEA that consider eddy effects performed better than the other models and yielded a negligibly small error over a wide range of loading conditions. Compared to the FEA, the proposed MEC estimates the IM performance much faster, which makes it more appealing for IM performance estimations.
14 January 2026 in Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi
Synchronous reluctance motors (SynRMs) have gained significant attention in modern drive applications owing to their magnet-free rotor structure, high efficiency, and robust performance under various operating conditions. Nevertheless, SynRMs remain prone to electrical and mechanical faults that can deteriorate their reliability. Among these, eccentricity faults are critical, as even minor misalignments between the rotor and stator can lead to unbalanced magnetic forces, increased vibration, and electromagnetic stress. This study investigates static (SE), dynamic (DE), and mixed (ME) eccentricity faults in SynRMs featuring three and four-flux barrier rotor geometries through 2D transient finite element analysis. The results reveal that ME causes the most severe electromagnetic distortion, while the three-flux barrier rotor exhibits higher torque ripple and reduced torque capability due to diminished saliency. Torque ripple is identified as the most sensitive fault indicator, increasing by up to 33% under ME. These findings provide valuable insights into the relationship between rotor geometry, fault severity, and machine performance, guiding future SynRM design and monitoring strategies.