The complexity of core loss estimation is an essential limitation for electric machine design engineers. It is critical to estimate the core losses and reduce them in the design stage to improve the machine efficiency. Current estimation methods based on the Steinmetz equation and loss separation are not accurate enough even at the rated conditions. This work describes a loss estimation technique combining finite element analysis (FEA) and actual core loss measurements. First, flux waveforms from various parts of the electric machine are determined using finite element analysis (FEA), then identical flux density waveforms are generated in a toroidal wound core made out of the same material as is used in the machine. The loss is measured per unit mass, and then the total motor core loss is calculated by combining the measured W/kg loss values for predefined sections of the motor. Estimation results are provided and compared with the Bertotti iron loss method. The proposed method is shown to improve the accuracy of loss estimation.
11 September 2023 in Ain Shams Engineering Journal
In this paper, a method to drive switched reluctance motors (SRM) with a modular four-switch bidirectional DC-DC converter and an H-bridge is proposed. The DC-DC converter operates as a buck or a boost converter with constant frequency to control each phase current while the H-bridge inverter switches only twice in a period to adjust the polarity of the phase voltage. Sliding mode control is designed to have fast and robust current control in the DC-DC converter. The sliding surface equation which is derived for all operation modes including buck and boost modes in motoring and regenerating conditions is defined with the estimated inductor current. The proposed drive system eliminates the bulk DC-capacitors and allows one to adjust the bus voltage individually for all phases. Moreover, the proposed system topology works with only one high-frequency switching device in the DC-DC conversion stage rather than two in conventional drives which provides a simpler current control and reduced switching losses.