David De Castro

Mr. David De Castro

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 September 2022 in Scientific Reports
Verified
Journal Article
Open access
PDF file
Adriana Eres-CastellanosAdriana Eres-Castellanos
Adriana Eres-Castellanos
ASAna Santana
Ana Santana
DCDavid De Castro
David De Castro
JJJosé A. Jimenez
José A. Jimenez
RRRosalia Rementeria
Rosalia Rementeria
Francisca CaballeroFrancisca Caballero
Francisca Caballero
Among the materials that might be manufactured with laser powder bed fusion (LPBF), one can highlight maraging steels, with excellent weldability, strength and fracture toughness. However, the effects of the processing parameters and the mechanisms governing the as-built texture are not clear yet. A recent publication showed a low texture index in the prior austenite, in contrast to other alloys subjected to LPBF with the same strategy. Authors suggested several hypotheses, although no conclusions were drawn. This work aims to investigate these findings by using a 300 maraging steel processed under different conditions, i.e. different printer, powder layer thickness and laser emission mode. To do so, X-Ray Diffraction, Electron Backscattered Diffraction and Scanning Electron Microscopy have been used. Results show that the heat treatment intrinsic to the LPBF process does not affect the prior austenite grains, whose texture and morphology remain unchanged throughout the process. Also, for the studied ranges, the microstructure texture is not related to the powder layer thickness or to the laser emission mode, although it could be affected by the laser power or the scan strategy. Finally, a low degree of variant selection has been observed, where the selected variants are those that contribute to a martensite cubic rotated texture.

20 June 2020 in Metals
Verified
Journal Article
Open access
PDF file
AGAlexis Graux
Alexis Graux
SCSophie Cazottes
Sophie Cazottes
DCDavid De Castro
David De Castro
David San-MartinDavid San-Martin
David San-Martin
Carlos MontesCarlos Montes
Carlos Montes
MPMichel Perez
Michel Perez
This study presents the design and development of a hot-rolled bainitic steel, presenting a good combination of strength and stretch-flangeability, for automotive applications. Ti, Nb, and Mo were added in the steel composition in order to control austenite grain sizes, enhance precipitation hardening, and promote the formation of bainite. This study focuses on the effect of process parameters on final microstructures and mechanical properties. These parameters are the finishing rolling temperature, which conditions the austenite microstructure before its decomposition, and the coiling temperature, which conditions the nature and morphology of the ferritic phases transformed. A preliminary study allowed to determine the austenite grain growth behavior during reheating, the recrystallization kinetics, and the continuous cooling transformation curves of the studied steel. Then, a first set of parameters was tested at a semi-industrial scale, which confirmed that the best elongation properties were obtained for homogeneous bainitic lath/granular microstructures, that can be produced by choosing a coiling temperature of 500 ∘ C . When choosing those parameters for the final industrial trial, the microstructure obtained consisted of a homogeneous lath/granular bainite mixture that presented a Ultimate Tensile Strength of 830 MPa and a Hole Expansion Ratio exceeding 70%.

1 February 2020 in Materials Characterization
Verified
Journal Article
Closed access
DCDavid De Castro
David De Castro
RRRosalia Rementeria
Rosalia Rementeria
Javier VivasJavier Vivas
Javier Vivas
TSThomas Sourmail
Thomas Sourmail
JPJ.D. Poplawsky
J.D. Poplawsky
Francisca CaballeroFrancisca Caballero
Francisca Caballero

9 April 2019 in Metals
Verified
Journal Article
Open access
PDF file
Francisca CaballeroFrancisca Caballero
Francisca Caballero
RRRosalia Rementeria
Rosalia Rementeria
LMLucia Morales-Rivas
Lucia Morales-Rivas
MBMiguel Benito-Alfonso
Miguel Benito-Alfonso
Jer-Ren YangJer-Ren Yang
Jer-Ren Yang
Carlos Garcia-MateoCarlos Garcia-Mateo
Carlos Garcia-Mateo
Steel components working in extreme conditions require materials presenting the highest performances. Nowadays, nanoengineering is being applied to the development of ultra-high strength steels as a key-enabling technology in the steel sector. The present article describes the multiscale structure of nano-grained steels designed using atomic transformation theory and processed by a simple heat treatment. Outstanding mechanical properties for these novel steels are reported, and strain-hardening mechanisms are discussed.

1 November 2021 in Materials Science and Technology
Verified
Journal Article
Open access
Adriana Eres-CastellanosAdriana Eres-Castellanos
Adriana Eres-Castellanos
DCDavid De Castro
David De Castro
Carlos MontesCarlos Montes
Carlos Montes
Carlos Garcia-MateoCarlos Garcia-Mateo
Carlos Garcia-Mateo
Francisca CaballeroFrancisca Caballero
Francisca Caballero
The latest progress in machine learning (ML) algorithms enabled to predict some steel physical properties previously modelled by linear regression (LR), such as the Ms temperature. Authors claimed that the performance given by ML models could improve the one of previous LR models, although they did not include fair comparisons. In this work, a large database was used to train different ML algorithms, whose Ms temperature predictions were compared to the ones of previous literature empirical models. ML methods were proved to require longer computational times and wider knowledge, while leading to similar results. Therefore, we recommend that ML methods are not always considered as the first option when trying to solve easy problems that can be modelled by LR techniques.

23 October 2019 in Metals
Verified
Journal Article
Open access
PDF file
Francisca CaballeroFrancisca Caballero
Francisca Caballero
JPJaume Pujante
Jaume Pujante
TSThomas Sourmail
Thomas Sourmail
RRRosalia Rementeria
Rosalia Rementeria
DCDavid De Castro
David De Castro
Esa VuorinenEsa Vuorinen
Esa Vuorinen
Nanostructured bainitic steels exhibit an optimum strength/toughness combination as a consequence of their extremely fine structure. They have also demonstrated potential for wear-resistance applications. The aim of this work was to develop bearing steels by the multi-scale control of complex ferritic structures, designed using atomic transformation theory and processed by novel heat treatments. Based on the results, the new ball bearings outperformed conventional grades, approaching more expensive material options.