This article comprehensively reviews the causes of wear of hydraulic components used in hydro-static transmission systems and their remedies by thermal coating processes. The wear of critical components of the hydraulic pump and motors, hydraulic valves, etc, is mainly due to abrasion, erosion, and cavitation. The most commonly found modes of wear in hydraulic components are contamination and abrasion wear. Such wear arresting can be done by using the surface coating and texturing of materials over the wear zones of the damaged parts. This article discusses the causes of wear in hydraulic components and suggests various solutions to reduce such wear. Recent challenges associated with the proposed solution for wear arresting and future scopes are identified in this review. In the end, some novel techniques for the treatment of wear in hydraulic components, such as laser beam treatment, plasma, Tungsten inert gas arc, and Electric discharge coating, have been discussed, which is the potential future work for enhancing the useful life of hydraulic components. These surface treatment methodologies can be applied to alter the surfaces of crucial hydraulic components that experience considerable wear, as seen in hydraulic pumps, valves, and other elements such as hydraulic cylinders.
17 November 2014 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
This article investigates the steady-state performance of a closed-circuit hydrostatic summation drive used in heavy earth moving machine through modelling and experiment. The proposed drive basically consists of variable displacement pump and bent-axis motor. The performance studies of the drive have been made for its two different modes of operation: using single motor and two motors. Bondgraph simulation technique is used to model the drive, where various losses are lumped into suitable resistive elements. The relationships of the losses with the state variables obtained from the model are identified through experiments. The dependencies of the loss characteristics on the load torque and the pump displacement ratio are studied. The model has been verified experimentally. The performances of the hydrostatic drives are studied at different torque levels with respect to its slip, torque-loss and overall efficiency, using the expressions describing the characteristics of the loss-coefficients. The investigation also identifies the operating range of the proposed hydrostatic drives with reasonable efficiency.
19 May 2019 in Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering
This article presents a brief note on the evolution of steering mechanisms and more emphasized on articulated steering system of the load haul dump machine. In this respect, pictorial representation of the evolution of steering mechanisms for on-road and articulated steering mechanisms of the load haul dump machine is made from the available literature. Critical review on basic elements required for the complete automation of the load haul dump vehicle steering system is presented. Different types of controllers for path tracking error minimization of the scale-modeled or simulated model of the load haul dump steering system are tabulated. Few case studies stimulating the complete automation of the load haul dump steering system employed on the field are also discussed. Challenges and some research gaps in making fully automated steering system of the load haul dump machine are identified in this review article. At the end, based on the critical review, some novel methods for making the fully automated steering system of the load haul dump machine is provided, which is the potential future work for the design and development of feasible automatic steering system.