1 January 2022 in Materials Today: Proceedings
30 January 2023 in International Journal of Hydrogen Energy
9 March 2021 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Solar energy is being used for the purpose of water distillation since long. The present work demonstrates the comprehensive experimental investigation of various heat transfer enhancement arrangements on tubular solar still for its performance improvement. These arrangements include; case-1: Tubular solar still (TSS) with flat plate basin (TSS-FP), case-2: TSS with U-corrugated basin (TSS-UA), case-3: TSS with the coupled cylindrical parabolic collector (TSS-CPC). According to the available literature, the exergy and economical analysis of tubular solar stills are not explored much in the previous studies. Thus, a comparative thermo-economic analysis, exergy analysis and system productivity analysis have been carried out. In addition to this, the study investigates the effects of different basin water depths on system productivity. It has been found that the case-3: TSS-CPC gives the highest productivity; it was 37.75% and 80.63% higher as compared to the case-2 and case-1 respectively. Also, in the same arrangement, the enhancement in the exergy efficiency was around 48.6% and 85.2% as compared to case-2 and case-1 respectively. The per liter cost of water obtained by TSS-FP, TSS-UA, and TSS-CPC were about 0.00592, 0.00511, and 0.00567 US $/m2 respectively. The study concludes that the U-Corrugated basin surface, less basin water depth, and the secondary heating arrangement improve the productivity of the tubular still significantly.
23 August 2024 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Efficient transportation of minerals and solid materials through pipelines requires very complex parameters and conditions. This research investigates the correlations between different flow parameters and pipe design elements to predict bend pressure drop—a factor that indicates the possibility of erosion both in the straight pipeline sections and in the bends. Adopting a response surface methodology approach, this study identifies material conveyance conditions with best results while maintaining minimal bend pressure drop. The research shows the significant influence of slurry concentration, velocity, particle diameter, particle concentration, and pipe diameter on bend pressure drop. The speed of conveyance turns out to be the main variable that affects the bend section, whereas in the horizontal pipe portions, the pipe diameter becomes more important. This research paper gives critical consideration of the factors controlling material conveyance with the aim of reducing bend pressure drop by up to 15% for dense slurry flow inside horizontal pipelines. This study reports the outcomes, including the results of the right design values for the parameters as 1.787 m/s, 8.82, 450 μm, 466.442 mm, and 1.2 for inlet velocity of the mixture, solid volume concentration, particle size, pipe diameter, and bend ratio. The response parameter bend pressure drop was 49.7 Pa at such conditions. This study provides valuable insights into optimizing material conveyance by understanding and manipulating these key parameters to reduce bend pressure drop by up to 15% in dense slurry flow within horizontal pipelines.
14 March 2017 in Computer Applications in Engineering Education