Background: Understanding the hemodynamics of an abdominal aortic aneurysm (AAA) is crucial for risk assessment and treatment planning. This study introduces a low-cost, patient-specific in vitro AAA model to investigate hemodynamics using particle image velocimetry (PIV) and flow-simulating circuit, validated through fluid–structure interaction (FSI) simulations. Methods: In this study, 3D printing was employed to manufacture a flexible patient-specific AAA phantom using a lost-core casting technique. A pulsatile flow circuit was constructed using off-the-shelf components. A particle image velocimetry (PIV) setup was built using an affordable laser source and global shutter camera, and finally, the flow field inside the AAA was analyzed using open-source software. Fluid–structure interaction (FSI) simulations were performed to enhance our understanding of the flow field, and the results were validated by PIV analysis. Both steady-state and transient flow conditions were investigated. Results: Our experimental setup replicated physiological conditions, analyzing arterial wall deformations and flow characteristics within the aneurysm. Under constant flow, peak wall deformations and flow velocities showed deviations within − 12% to + 27% and − 7% to + 5%, respectively, compared to FSI simulations. Pulsatile flow conditions further demonstrated a strong correlation (Pearson coefficient 0.85) in flow velocities and vectors throughout the cardiac cycle. Transient phenomena, particularly the formation and progression of vortex structures during systole, were consistently depicted between experimental and numerical models. Conclusions: By bridging high-fidelity experimental observations with comprehensive computational analyses, this study underscores the potential of integrated methodologies in enhancing our understanding of AAA pathophysiology. The convergence of realistic AAA phantoms, precise PIV measurements at affordable cost point, and validated FSI models heralds a new paradigm in vascular research, with significant implications for personalized medicine and bioengineering innovations.
7 September 2017 in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Firmaların ürün kalitelerini arttırmaları ve aynı zamanda ürün maliyetlerini düşürebilmeleri için imalat süreçlerinde sürekli iyileştirme çalışmaları yapmaları gerekmektedir. Ürünün kalitesini ve üretim maliyetini etkileyen unsurlardan en önemlisi çalışanlardır. Çalışanları etkileyen çalışma koşullarının incelenmesi, analiz edilmesi ve değerlendirilmesi, üretim süreçlerinde yapılacak iyileştirmelerde önemli rol oynamaktadır. Çalışma sırasında tekrarlanan ve uzun süreli çalışma duruşları, çalışanın vücudunda çeşitli şiddetlerde zorlanmalara ve zamanla kas iskelet sistemi rahatsızlıklarına (KİSR) neden olabilmektedir. KİSR, çalışanın performansını ve iş verimini olumsuz etkilemektedir. Çalışma pozisyonları RULA, REBA, NIOSH, OWAS vb. gözlemsel yöntemler ile analiz edilebilmektedir. Bunların yanı sıra insan vücudunu biyomekanik esaslara göre inceleyerek eklem reaksiyon kuvvetlerine göre değerlendirme yapılmasına olanak sağlayan yazılımlarla da analiz yapılabilmektedir. Bu çalışmada, tarım aletleri üreten bir işletmede ot toplama tırmığı montajında görülen duruş bozuklukları, insan vücudunun biyomekanik esaslara göre analizini sağlayan Bilgisayar Destekli Ergonomi (BDE) Yazılımı AnyBody Modelleme Sistemi (AMS) ile incelenmiştir. Yapılan değerlendirme sonucunda çalışma esnasında oluşan duruş bozukluklarını gidermek amacıyla yeni bir montaj ünitesi tasarımı önerilmiştir.
4 August 2026 in Journal of Maxillofacial and Oral Surgery