Jiale Zhou

Dr. Jiale Zhou


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
PYPeng Yu
Peng Yu
SXSheng Xu
Sheng Xu
JCJiuchao Chen
Jiuchao Chen
LZLingke Zhu
Lingke Zhu
JZJiale Zhou
Jiale Zhou
ZSZewen Sun
Zewen Sun
Currently, there are two primary issues with CFD simulations of local scour around bridge foundations using the RANS method. Firstly, the self-sustaining characteristics of turbulent boundary conditions at the inlet require special attention. Secondly, the simulated location of the maximum scour depth does not align with experimental observations. This paper employs the RANS method to model the hydrodynamic characteristics surrounding bridge piers. The sediment transport model and sediment-sliding model, considering any slope of the riverbed, were adopted to simulate the spatiotemporal evolution of local scour around the bridge foundation. Building on traditional methods and assuming local turbulence equilibrium, a self-sustaining model is theoretically derived. This model swiftly develops a balanced turbulent boundary layer, achieving a horizontally uniform flow field and effectively maintaining consistency between the inlet-given turbulent profile and physical reality. Additionally, by incorporating the velocity component of the downward-flow in front of the pier and the average shear stress around the pier into the excess shear stress model, the refined wall shear stress model accurately estimates the scouring contributions of the downward-flow and the horseshoe vortex system in this region. The numerical results including the maximum scour depth, location, and scour pit shape are consistent with experimental findings. The findings demonstrate that the numerical approach proposed in this study effectively addresses the issue of inadequate estimation of turbulent characteristics in scour pit at the leading edge of bridge piers using the RANS method. This method offers novel insights and approaches for addressing local scour issues in bridges and offshore wind turbines, as well as vortex-induced vibration issues in submarine pipelines.

22 June 2026 in Materials
Verified
Journal Article
Open access
PDF file
ZZZhenhai Zeng
Zhenhai Zeng
PYPeng Yu
Peng Yu
CZChen Zhuoyi
Chen Zhuoyi
JZJiale Zhou
Jiale Zhou
Haohui XinHaohui Xin
Haohui Xin
ALAnqing Lin
Anqing Lin
Magnesium ammonium phosphate cement (MAPC) exhibits rapid setting, high early strength, and potential resistance to elevated temperatures, making it a promising material for rapid repair and fire-resistant applications. Gold tailings (GT), which contain thermally stable Si- and Al-rich components, show potential for improving the high-temperature performance of MAPC. However, the mechanisms by which GT affects the residual performance and phase evolution of MAPC after exposure to elevated temperatures remain insufficiently understood. In this study, GT was used to replace the total binder in MAPC mortar at mass replacement levels of 0%, 10%, 20%, and 30%, while the MgO/NH4H2PO4 mass ratio in the remaining binder was kept constant. The effects of GT content on the workability of MAPC mortar, as well as its visual appearance, mechanical properties, mass loss rate, phase evolution, and microstructure after exposure to elevated temperatures, were investigated. The results showed that GT incorporation shortened the setting time and reduced the fluidity and room-temperature strength. After exposure to elevated temperatures, the GT-containing specimens exhibited higher strength retention and lower mass loss rates. After exposure to 1000 °C, the compressive strength of the specimen containing 30% GT reached 15.37 MPa, which was approximately 44.0% higher than that of the specimen without GT. Its flexural strength retention and mass loss rate were 47.42% and 9.84%, respectively. XRD and SEM results indicated that the formation of high-temperature residual phases, including Mg3(PO4)2, Mg2SiO4, and aluminosilicates, may contribute to the improvement of the residual matrix structure after exposure to elevated temperatures. Overall, GT incorporation improved the residual mechanical properties of MAPC after exposure to elevated temperatures, and the specimen containing 30% GT showed comparatively superior performance within the experimental scope of this study. These findings provide a reference for the resource utilization of GT in MAPC-based heat-resistant repair materials.