Due to the influence of material characteristics and engineering imperfections, the residual magnetic fields including static and dynamic field in a lightweight magnetically shielded room (MSR) present non-uniform distribution characteristic. To effectively reduce the residual static field, a non-uniform field compensation method based on distributed coils has been proposed. This method takes the L2-norm of the magnetic field at the target array points as the objective function, to optimize the compensation current in each of the designed distributed coils, achieving non-uniform field compensation. To further achieve compensation for non-uniform residual dynamic field, a closed-loop control system containing a voltage divider and multi-channel amplifiers is designed in this paper. Additionally, the coil constant of the distributed differential coils and the initial magnetic field distribution vector for dynamic compensation are redefined. In conjunction with a PI controller, dynamic compensation is achieved using a single optically pumped magnetometer as the feedback component. The experimental results indicate that the average dynamic field decreased from 376.75 pT to 27.80 pT over the central volume of (300 mm)3 in MSR, achieving a near-zero magnetic environment. This method has universal applicability for compensating non-uniform residual field under different working conditions.
Hysteresis is a fundamental characteristic of magnetic materials. The Jiles–Atherton (J-A) hysteresis model, which is known for its few parameters and clear physical interpretations, has been widely employed in simulating hysteresis characteristics. To better analyze and compute hysteresis behavior, this study established a state space representation based on the primitive J-A model. First, based on the five fundamental equations of the J-A model, a state space representation was established through variable substitution and simplification. Furthermore, to address the singularity problem at zero crossings, local linearization was obtained through an approximation method based on the actual physical properties. Based on these, the state space model was implemented using the S-function. To validate the effectiveness of the state space model, the hysteresis loops were obtained through COMSOL finite element software and tested on a permalloy toroidal sample. The particle swarm optimization (PSO) method was used for parameter identification of the state space model, and the identification results show excellent agreement with the simulation and test results. Finally, a closed-loop control system was constructed based on the state space model, and trajectory tracking experiments were conducted. The results verify the feasibility of the state space representation of the J-A model, which holds significant practical implications in the development of magnetically shielded rooms, the suppression of magnetic interference in cold atom clocks, and various other applications.
Magnetically shielded rooms (MSRs) provide a near-zero field environment for magnetoencephalography (MEG) research. Due to the high cost of high-permeability materials and the weak shielding capability against low-frequency magnetic disturbance, it is necessary to further design active compensation coils combined with a closed-loop control system to achieve dynamic nulling of environmental magnetic disturbance. To enhance the performance of the dynamic nulling system, this paper proposes a novel controller design method based on Padé approximation and generalized active disturbance rejection control (GADRC). First, a precise closed-loop model of the dynamic nulling system is established. On this basis, the delay element of the optically pumped magnetometer (OPM) is approximated using the Padé approximation method, and the controller is designed within the GADRC framework. The system’s stability and disturbance suppression capability are analyzed using frequency-domain methods. To validate the effectiveness of the proposed method, simulations and experiments are conducted, achieving a shielding factor greater than 40 dB at 0.1 Hz. After filtering out power frequency interference, the peak-to-peak field fluctuation is reduced from 320.3 pT to 1.8 pT.
Magnetically suspended control moment gyro (MSCMG) outputs gyro moment by changing the direction of the rotor angular momentum to adjust the spacecraft attitude. In the process of outputting moment, due to the moving‐gimbal effect, the power consumption of magnetic bearing occupies a large proportion in MSCMG. The existing low power control methods have problems that adjustment time is long and the effect of reducing energy consumption depends on the model accuracy. To solve these problems, the method of current adaptive adjustment‐gimbal angular velocity feedforward (CAA‐GAVF) is proposed. The CAA‐GAVF method controls rotor deflect actively so that the permanent magnet can generate moment to offset the coupling moment of moving‐gimbal effect, thus reducing the power consumption of control current. In CAA‐GAVF, the deflection angle of rotor is quickly adjusted by the feedforward of gimbal angular velocity. The current integral value is used to adjust the feedforward matrix adaptively and precisely. The experimental results show that the power consumption of CAA‐GAVF method is reduced to 43.3% of the traditional control method.