Designing and deploying telecommunications and broadcasting networks in the challenging terrain of the Amazon region pose significant obstacles due to its unique morphological characteristics. Within low-power wide-area networks (LPWANs), this research study introduces a comprehensive approach to modeling large-scale propagation loss channels specific to the LoRaWAN protocol operating at 915 MHz. The objective of this study is to facilitate the planning of Internet of Things (IoT) networks in riverside communities while accounting for the mobility of end nodes. We conducted extensive measurement campaigns along the banks of Universidade Federal do Pará, capturing received signal strength indication (RSSI), signal-to-noise ratio (SNR), and geolocated point data across various spreading factors. We fitted the empirical close-in (CI) and floating intercept (FI) propagation models for uplink path loss prediction and compared them with the Okumura–Hata model. We also present a new model for path loss with dense vegetation. Furthermore, we calculated received packet rate statistics between communication links to assess channel quality for the LoRa physical layer (PHY). Remarkably, both CI and FI models exhibited similar behaviors, with the newly proposed model demonstrating enhanced accuracy in estimating radio loss within densely vegetated scenarios, boasting lower root mean square error (RMSE) values than the Okumura–Hata model, particularly for spreading factor 9 (SF9). The radius coverage threshold, accounting for node mobility, was 945 m. This comprehensive analysis contributes valuable insights for the effective deployment and optimization of LoRa-based IoT networks in the intricate environmental conditions of the Amazon region.

Photovoltaic systems can strengthen the energy matrix aiming at energy sustainability, however, their intermittence, the availability time frame and seasonality effects are complicating aspects for the operation of these systems. To mitigate such problems, a possible measure is the operation of hybrid systems (HS) associated with storage systems to meet the energy demand. This study presents real operational scenarios for the management of a hybrid mini-grid installed in the Amazon region in Brazil, capable of managing energy supply and demand, changing the generation curve, reducing fossil fuel consumption and energy costs, in addition to providing flexibility and operational safety to the electrical operating under on-grid or off-grid conditions. Through technical and economic analyses, the objective of this study is to show that hybrid systems can be implemented in small and medium consumers, in addition to generating a new market option for utilities. This research evaluates the operation of HS concurrently with the electrical grid and the results show that the system meets the technical requirements, in addition to bringing financial and ecological benefits. This information can support the decisions of consumers, utilities and energy operators for the development of the national market for on-grid and off-grid HS.

Global energy systems are undergoing a transition process towards renewable energy and energy efficiency practices. Induction motors play an important role in this energy transformation process since they are widely used as industrial loads, representing more than 53% of global energy consumption. With more countries adopting minimum energy performance standards through more efficient induction motors, comparisons between these new technologies in the presence of electrical disturbances must be systematically evaluated before adopting a substitution policy in the industry. To this end, this work presents a comparative analysis of the impact of harmonic voltages on the performance and temperature rise of electric motors classes IE2, IE3 and IE4 in the same operational conditions in view of future substitutions. The results show that under ideal operating conditions the IE4 class permanent magnet motor has better performance in terms of consumption and temperature, however presenting non-linear characteristics. In the presence of voltage harmonics, this scenario changes completely according to the harmonic content. Finally, aiming to analyze the harmonics influence in the motor temperature rise a statistical analysis by means of Spearman correlation matrices is presented.

This study addresses the problem of determining which non‐linear loads can be considered potential harmonic sources to the voltage harmonic distortions observed in the utility grid voltages. Statistical regression models are used to establish correlations between the simultaneously measured harmonic voltages, in the grid, and harmonic currents, at each non‐linear individual load. First, the R ‐squared statistic is used to decide the goodness of fit of the developed models, giving indication on the relevance of the model. In order to overcome the limitation of the linear regression model based on voltage and current magnitudes measurements only, that imposes a constant behaviour for the background harmonic sources, a non‐parametric regression model is suggested and a comparison between the performances of the two models is carried out. Field data from two real electrical systems, one having a 138 kV substation in which a large industrial load and a 34.5 kV rural long feeder are connected; and the other having four urban 13.8 kV feeders supplying industrial and commercial loads, were used to develop and validate the statistical models used in the application.

The growth in global electricity demand has expanded the search for new energy resources. Renewable sources such as photovoltaic (PV) systems have proven to be major alternatives. PV generators connected to distribution grids have exhibited significant growth in the last decade, so it is essential to analyse the impacts resulting from this increase. This work investigated the influence of high PV system penetration in distribution grids in terms of harmonic levels. In particular, this study addressed the distortions in voltage and current waveforms in the presence and absence of PV generators connected to a distribution grid. Additionally, the total harmonic content and the individual harmonic frequencies of voltage and current were analysed. This study was performed with an IEEE 37 bus distribution system and the Open Distribution System Simulator software (OpenDSS). The results show that the voltage limits of some phases far away from a substation can exceed the limits. Furthermore, the total harmonic distortion (THD) and individual harmonic distortion (IHD) levels for voltage and current were significantly high for harmonics of the 3rd, 5th, and 7th orders, where current levels violate the standard levels.