Biopolymers emerge as promising candidates for enhanced oil recovery (EOR) applications due to their molecular structures, which exhibit better stability than polyacrylamides under harsh conditions. Nonetheless, biopolymers are susceptible to oxidation and biological degradation. Biopolymers reinforced with nanoparticles could be a potential solution to the issue. The nanofluids’ stability and performance depend on the nanoparticles’ properties and the preparation method. The primary objective of this study was to evaluate the effect of the preparation method and the nanoparticle type (SiO2, Al2O3, and TiO2) on the viscosity and stability of the scleroglucan (SG). The thickening effect of the SG solution was improved by adding all NPs due to the formation of three-dimensional structures between the NPs and the SG chains. The stability test showed that the SG + Al2O3 and SG + TiO2 nanofluids are highly unstable, but the SG + SiO2 nanofluids are highly stable (regardless of the preparation method). According to the ANOVA results, the preparation method and standing time influence the nanofluid viscosity with a statistical significance of 95%. On the contrary, the heating temperature and NP type are insignificant. Finally, the nanofluid with the best performance was 1000 ppm of SG + 100 ppm of SiO2_120 NPs prepared by method II.
With the design of experiments (DoE), this study analyses the influence of physical (capillary diameter and pressure drop) and chemical variables (salinity, polymer concentration, and molecular weight) on the mechanical degradation of partially hydrolyzed polyacrylamide-type polymer solutions (HPAM) used in enhanced oil recovery processes. Initially, with the help of a fractional factorial design (2k-p), the variables with the most significant influence on the polymer's mechanical degradation were found. The experimental results of the screening demonstrate that the factors that statistically influence the mechanical degradation are the molecular weight, the diameter of the capillary, and the pressure differential. Subsequently, a regression model was developed to estimate the degradation percentages of HPAM polymer solutions as a function of the significant factors influencing the mechanical degradation of polymer solutions. This model had a 97.85% fit for the predicted values under the experimental conditions. Likewise, through the optimization developed by the Box Behnken response surface methodology, it was determined that the pressure differential was the most influential factor. This variable was followed by the capillary diameter, where less than 50% degradation rates are obtained with low polymer molecular weight (6.5 MDa), pressure differentials less than 500 psi, and diameters of the capillary greater than 0.125 inches.