Micro-tools comprising difficult-to-machine materials have seen widespread application in micro-manufacturing to satisfy the demands of micro-part processing and micro-device development. Taking micro-shafts as an example, the related developmental technology, based on wire electric discharge grinding (WEDG) as the core method, is one of the key technologies used to prepare high-precision micro-shafts. To enable efficient and high-precision machining of micro-shafts with target diameters, instead of performing multiple repeated on-machine measurements and reprocessing, a geometric constraint strategy is proposed based on the previously introduced twin-mirroring-wire tangential feed electrical discharge grinding (TMTF-WEDG). This strategy encompasses the tool setting method, tangential feed distance compensation, and an equation that establishes the relationship between tangential distance and diameter variation. These components are derived from a key points analysis of the geometric constraints. The micro-shafts with diameters of 50 µm and consistencies of ±1.5 µm are repeatedly processed. A series of micro-shafts with diameters ranging from 30 µm to 120 µm achieve geometric constraints with a diameter accuracy of ±2 µm, accompanied by the complete continuous automation of the entire process. Accordingly, it can be concluded that the geometric constraint strategy is flexible and stable and can be controlled with high precision in the TMTF-WEDG process.
16 June 2020 in The International Journal of Advanced Manufacturing Technology
Thin wafers and thin wires are beneficial to the photovoltaic industry for reducing costs, increasing efficiency, and reducing the cost of electricity generation. It is a development trend in solar silicon wafer cutting. Thin wire cutting reduces the kerf between silicon wafers to less than 50 μm. Therefore, it is extremely difficult to supply cutting fluid to the cutting area. And this affects cutting performance. This paper proposes the use of the capillary effect produced by ultrasonic waves in fixed diamond wire slicing to improve the cutting fluid supply and reduce wafer adsorption. To explore the rules of ultrasonic capillary action between two plates and guide the industrial applications, the effects of the distance between parallel plates, the distance from the bottom of the parallel plates to the ultrasonic radiation surface, the non-parallelism between the plates, the temperature of the working fluid, the ultrasonic action time, and the type of working fluid on the liquid level rise height were studied. The conclusions can be used to guide the improvement of the supply of working fluid in fixed diamond wire slicing.
16 May 2022 in The International Journal of Advanced Manufacturing Technology