Centrifugal slurry pumps are extensively applied in industrial industries such as power metallurgy, petrochemicals, deep-sea mining, and other industrial fields. The primary objective of this research is to assess how conveying settings and particle characteristics influence the 100SHL4147 slurry pump’s collision and erosion properties. Firstly, the computational fluid dynamics–discrete element method (CFD-DEM) coupling model fully coupled particle–fluid co-flow numerical simulation interface is built by utilizing the C++ language and the results are proven with tests. Subsequently, the simulation examines the wear properties of different sections through which the flow passes in the 100SHL4147 centrifugal slurry pump. In addition, following theoretical guidance, the slurry pump impeller’s wear resistance performance can be improved by adjusting design factors such as the intake edge location and the blade wrap angle. The results are as follows. It is recommended to replace the impeller promptly due to the findings that indicate that the entire blade’s pressure surface is vulnerable to different degrees of erosion under high-concentration situations. When the particle size increased from 0.4 to 0.8 mm, the wear rate decreased by up to 15%, as fewer particles were transported, lowering the collision frequency. Conversely, smaller particles intensify component wear. Adjusting the blade wrap angle from 66° to 96° reduced impeller and volute wear by an estimated 20%, enhancing the durability but slightly decreasing the delivery capacity. Extending the blade’s leading edge toward the intake improved the flow capacity, although it increased the wear frequency from one-third of the pressure surface to the trailing edge.

Marine sediment pumps are extensively applied in marine engineering fields with complex media and harsh flow conditions. Therefore, this study conducts a multi-factor optimization design for a marine sediment pump. The response surface optimization method is utilized to improve the efficiency by optimizing the number of impeller blades, the blade inlet angle, the blade outlet angle, and the blade wrap angle. Next, a response surface regression model is created, and the influence of geometric parameters on the efficiency is determined. Meanwhile, the energy loss mechanism and vortical structure characteristics after optimization are analyzed by applying entropy production and the method for identifying Omega vortices. The findings suggest a 6.33% efficiency enhancement in the optimized model under the design conditions. The impeller’s internal flow field is enhanced, and the entropy generation rate is significantly diminished. The fluid flow adhered more closely to the blade profile, and the velocity and pressure distribution exhibit better uniformity. The presence of large-scale vortices and occurrences of flow separation within the impeller passage experience a notable decrease, and the overall fluid pressure fluctuation amplitude decreased, resulting in a more stable flow. Therefore, the discoveries from the research offer references for the design and selection of marine sediment pumps.

A submersible sewage pump is designed for conveying solid–liquid two-phase media containing sewage, waste, and fiber components, through its small and compact design and its excellent anti-winding and anti-clogging capabilities. In this paper, the computational fluid dynamics–discrete element method (CFD-DEM) coupling model is used to study the influence of different conveying conditions and particle parameters on the wear of the flow components in a submersible sewage pump. At the same time, the energy balance equation is used to explore the influence mechanism of different tip clearance sizes on the internal flow pattern, wear, and energy conversion mechanism of the pump. This study demonstrates that increasing the particle volume fraction decreases the inlet particle velocity and intensifies wear in critical areas. When enlarging the tip clearance thickness from 0.4 mm to 1.0 mm, the leakage vortex formation at the inlet is enhanced, leading to increased wear rates in terms of the blade and volute. Consequently, the total energy loss and turbulent kinetic energy generation increased by 3.57% and 2.25%, respectively, while the local loss coefficient in regard to the impeller channel cross-section increased significantly. The findings in this study offer essential knowledge for enhancing the performance and ensuring the stable operation of pumps under solid–liquid two-phase flow conditions.