Epoxy vitrimer adhesives combining good thermal stability, high mechanical robustness, strong metal adhesion, and sustainable recyclability are highly desirable for next-generation electronic packaging. However, achieving these properties remains challenging due to the limited molecular rearrangement and fixed dynamic bond density. Herein, a Schiff base-containing epoxy precursor (VDE) was synthesized and cured with diethyltoluenediamine (DETDA) and 4,4′-diaminodiphenyl disulfides (AFD) to construct epoxy vitrimers (VDA) containing dynamic imine and disulfide bonds. Unlike conventional epoxy vitrimers with a fixed dynamic bond density, the dual dynamic bond density in VDA vitrimers can be readily tuned by varying the AFD/DETDA ratio, thereby enabling systematic regulation of the network structure, dynamic behavior, thermomechanical properties, and adhesion performance. Among them, VDA-75 with a 75 mol% AFD content achieves a balanced overall performance, exhibiting a high glass transition temperature (Tg) of 173.5 °C, a tensile strength of 92.6 MPa, a reprocessing temperature 26.5 °C above its Tg and a mechanical recovery rate of 88.2% after three reprocessing cycles. Stress relaxation and Arrhenius analyses confirm the tunable dynamic exchange kinetics of the VDA vitrimers. Furthermore, VDA-75 demonstrates strong adhesion to Cu and Al substrates, with lap‑shear strengths of 12.3 MPa and 20.3 MPa, respectively. Notably, it also exhibits a 94.6% retention of initial lap-shear strength after three re-adhesion cycles. In addition, the VDA vitrimers can be chemically debonded in DTT/DMF solution, enabling facile separation of adhesive layers from metal substrates. This work presents a tunable dual-dynamic-bond strategy for designing high-performance epoxy vitrimers that integrate high mechanical robustness, strong metal adhesion, enhanced reprocessability, and sustainable lifecycle management.