The goal of the present study was to develop a low-density thermal insulation board using wood fibers and a bio-based adhesive as a binder, which was prepared from a crude glycerol and citric acid mixture. The physical and mechanical properties of insulation boards manufactured using two ratios of crude glycerol and citric acid (1:0.66 and 1:1 mol/mol) and two adhesive contents (14% and 20%) were evaluated. The results show that the insulation boards with a range of density between 332 to 338 kg m−3 present thermal conductivity values between 0.064 W/m-K and 0.066 W/m-K. The effect of adhesive content was very significant for certain mechanical properties (tensile strength perpendicular to surface and compressive strength). The tensile strength (internal bond) increased between 20% and 36% with the increased adhesive content. In contrast, the compressive strength decreased between 7% and 15%. The thermo-mechanical properties obtained of insulation boards such as thermal conductivity, traverse strength, tensile strength parallel and perpendicular to surface, and compressive strength are in accordance with the requirements of the American Society for Testing and Materials C208-12 standard for different uses. The results confirm the potential of crude glycerol and citric acid mixture to be used as an adhesive in the wood fiber insulation boards’ manufacturing for sustainability purposes.
26 June 2017 in Journal of Coatings Technology and Research
Lignin is the most abundant renewable source of aromatic compounds and has attracted considerable industrial interest. However, owing to its complex and heterogeneous structure, as well as its recalcitrant nature, lignin has been less extensively valorized than other components of lignocellulosic biomass, such as cellulose and hemicellulose. Oxidative depolymerization has emerged as a promising strategy for converting lignin into value added chemicals. This process involves the oxidation of lignin in acidic or alkaline media using suitable oxidants and catalytic systems to produce high-value platform chemicals traditionally derived from petroleum resources. This review highlights recent advances in the oxidative depolymerization of lignin, with particular emphasis on the conversion of technical lignins into two main categories of valuable products: aromatic and aliphatic monomers. The catalytic systems and operating conditions that influence product selectivity are discussed, along with the potential of these products as renewable alternatives to fossil-derived chemicals in various industrial applications. Finally, opportunities for integrating lignin oxidative depolymerization into lignin biorefineries and pulp and paper mills are explored.