Orhan Yalçınkaya

Dr. Orhan Yalçınkaya

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 June 2023 in Applied Thermal Engineering
Verified
Journal Article
Closed access
OYOrhan Yalçınkaya
Orhan Yalçınkaya
UDUfuk Durmaz
Ufuk Durmaz
ATAhmet Ümit Tepe
Ahmet Ümit Tepe
ÜUÜnal Uysal
Ünal Uysal
MÖMehmet Berkant Özel
Mehmet Berkant Özel

5 March 2024 in Energies
Verified
Journal Article
Open access
OYOrhan Yalçınkaya
Orhan Yalçınkaya
UDUfuk Durmaz
Ufuk Durmaz
ATAhmet Ümit Tepe
Ahmet Ümit Tepe
Ali Cemal BenimAli Cemal Benim
Ali Cemal Benim
ÜUÜnal Uysal
Ünal Uysal
The main purpose of this investigation was to explore the heat transfer and flow characteristics of aero-foil-shaped fins combined with extended jet holes, specifically focusing on their feasibility in cooling turbine blades. In this study, a comprehensive investigation was carried out by applying impinging jet array cooling (IJAC) on a semi-circular curved surface, which was roughened using aerofoil-shaped fins. Numerical computations were conducted under three different Reynolds numbers (Re) ranging from 5000 to 25,000, while nozzle-to-target surface spacings (S/d) ranged from 0.5 to 8.0. Furthermore, an assessment was made of the impact of different fin arrangements, single-row (L1), double-row (L2), and triple-row (L3), on convective heat transfer. Detailed examinations were performed on area-averaged and local Nusselt (Nu) numbers, flow properties, and the thermal performance criterion (TPC) on finned and smooth target surfaces. The study’s results revealed that the use of aerofoil-shaped fins and the reduction in S/d, along with surface roughening, led to significant increases in the local and area-averaged Nu numbers compared to the conventional IJAC scheme. The most notable heat transfer enhancement was observed at S/d = 0.5 utilizing extended jets and the surface design incorporating aerofoil-shaped fins. Under these specific conditions, the maximum heat transfer enhancement reached 52.81%. Moreover, the investigation also demonstrated that the highest TPC on the finned surface was achieved when S/d = 2.0 for L2 at Re = 25,000, resulting in a TPC value of 1.12. Furthermore, reducing S/d and mounting aerofoil-shaped fins on the surface yielded a more uniform heat transfer distribution on the relevant surface than IJAC with a smooth surface, ensuring a relatively more uniform heat transfer distribution to minimize the risk of localized overheating.

21 March 2024 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Open access
PDF file
OYOrhan Yalçınkaya
Orhan Yalçınkaya
UDUfuk Durmaz
Ufuk Durmaz
Numerical studies were performed in this study to analyze the effect of dimensionless elongated injection holes (G/d = 0.5, 2.0, 4.0, 8.0) on heat and flow characteristics on rib-roughened surfaces with an array of inclined impingement jets. Experimental and numerical data from existing literature were used to validate the numerical solution procedure’s heat transfer and flow characteristics in the semicircular test section. The turbulence equations were solved using the SST k-ω turbulence model by varying the Reynolds number from 5000 to 25,000. The curvature effect and staggered array pattern created an additional stagnation region between adjacent impinging jets on smooth surfaces, leading to a low heat transfer zone. Rectangular cross-sectional V-shaped ribs (VSR) were placed in regions where the stagnation point occurs to eliminate this disadvantage. The effect of different normalized rib heights (Hr/d = 0, 0.2, 0.3, 0.4) and rib angles (α = 30°, 45°, 60°, 90°) on the curved surface was also investigated to increase convective heat transfer performance and achieve more homogenous heat transfer distribution by relatively reducing the effect of thermal stresses. Flow properties, area-averaged and local Nusselt number variations on smooth and ribbed surfaces, and the thermal performance criterion (TPC) were investigated in detail. The results indicated an increase in overall heat transfer and a more evenly distributed measurement region compared to the conventional (unextended jet and smooth surface) jet impingement configuration. The most significant heat transfer enhancement from combining the elongated jets with VSR was 47.23% at Hr/d = 0.2 by reducing the G/d to 0.5. In addition, the highest TPC was determined as 1.07 on the proposed model with G/d = 2.0 and Hr/d = 0.2 at Re = 25,000.

22 November 2022 in ASME Journal of Heat and Mass Transfer
Verified
Journal Article
Closed access
PDF file
OYOrhan Yalçınkaya
Orhan Yalçınkaya
UDUfuk Durmaz
Ufuk Durmaz
ATAhmet Ümit Tepe
Ahmet Ümit Tepe
ÜUÜnal Uysal
Ünal Uysal
MÖMehmet Berkant Özel
Mehmet Berkant Özel
In a jet impingement cooling (JIC) system, the layout of the target surface and length of the jet holes can change both the flow field and the heat transfer characteristics. Elliptical-shaped pins (ESPs) with different heights and layouts on the target surface of the extended jet hole configurations were examined numerically in a jet impingement system. Normalized nozzle length (Gj/Dj) and normalized pin height (Hp/Dj) were investigated as geometric parameters. Also, the effect of different pin layouts (R1, R2, R3) on heat transfer dissipation was studied by changing the number of pin rows in particular configurations. Numerical analyses were conducted under turbulent flow conditions (16250 ≤ Re ≤ 32500). Nusselt (Nu) numbers, pressure drop, and the thermo-hydraulic performance of the physical model were quantitatively researched to elucidate the underlying mechanisms of enhanced heat transfer by the ESPs. Results showed that area-averaged Nu number on the target wall increased up to 35.82% for Re = 16250 by R2Gj/Dj = 1.0 and Hp/Dj = 0.167 compared to the conventional JIC system. The performance evaluation criterion (PEC) was used to analyze the thermo-hydraulic performance of the examined physical models. According to the PEC values, the most feasible parameters for all Re numbers were R3Gj/Dj = 1.0 and Hp/Dj = 0.167. Furthermore, increasing the number of pin rows in the channel also increased the uniformity of the local heat transfer distribution according to Nu contours.

15 August 2024 in Journal of the Taiwan Institute of Chemical Engineers
Verified
Journal Article
Closed access
OYOrhan Yalçınkaya
Orhan Yalçınkaya
MÖMehmet Berkant Özel
Mehmet Berkant Özel
UDUfuk Durmaz
Ufuk Durmaz
ÜUÜnal Uysal
Ünal Uysal

10 September 2025 in Case Studies in Thermal Engineering
Verified
Journal Article
Open access
MÖMehmet Berkant Özel
Mehmet Berkant Özel
UDUfuk Durmaz
Ufuk Durmaz
MÖMuhammed Ali Nur Öz
Muhammed Ali Nur Öz
OYOrhan Yalçınkaya
Orhan Yalçınkaya
ÜUÜnal Uysal
Ünal Uysal
ABAli Cemal Beni̇m
Ali Cemal Beni̇m