Metasurface absorbers have shown significant potential in stealth applications due to their adaptability and capacity to reduce the backscattering of electromagnetic (EM) waves. Nevertheless, due to the materials used in the terahertz (THz) range, simultaneously achieving excellent stealth performance in ultrawideband remains an important and difficult challenge to overcome. In this study, an ultrawideband absorber is proposed based on indium tin oxide (ITO) and polyethylene-terephthalate (PET), with a structure thickness of only 0.16λ. ITO sheets are utilized to achieve broad-spectrum, optical transparency and flexibility of the metasurface. The results show that absorption higher than 90% can be achieved in the frequency band ranging from 1.75 to 5 THz under normal TE and TM polarizations, which covers a wide THz band. The structure is insensitive to polarization angles and exhibits 97% relative bandwidth above 90% efficiency up to an oblique incident angle of 60°. To further validate the efficiency of the absorption performance, the radar cross-section (RCS) reduction investigation was performed on both planar and conformal configurations. The findings show that under normal incidence EM waves, both flat and curved surfaces can achieve RCS reduction of over 10 dB, covering an extremely wide frequency range of 1.75 to 5 THz. The metasurface presented in this study exhibits significant potential for use in several THz applications, including flexible electronic devices and stealth aircraft windows.

Multifunctional integrated meta-devices are the demand of modern communication systems and are given a lot of attention nowadays. Most of the research has focused on either cross-polarization conversion (CPC) or linear-to-circular (LP–CP) conversion. However, simultaneously realizing multiple bands with good conversion efficiency remains crucial. This paper proposes a multiband and multifunctional dual reflective polarization converter surface capable of converting a linearly polarized (LP) wave into a circularly polarized (CP) wave, in frequency bands of 12.29–12.63 GHz, 16.08–24.16 GHz, 27.82–32.21 GHz, 33.75–38.74 GHz, and 39.70–39.79 GHz, with 3 dB axial ratio bandwidths of 2.7%, 40.15%, 14.6%, 13.76%, and 0.2%, respectively. Moreover, the converter is capable of achieving CPC with a polarization conversion ratio (PCR) that exceeds 95%, within the frequency ranges of 13.10–14.72 GHz, 25.43–26.00, 32.46–32.56 GHz, and 39.14–39.59 GHz. In addition, to identify the fundamental cause of the CPC and LP–CP conversion, a comprehensive theoretical investigation is provided. Furthermore, the surface current distribution patterns at different frequencies are investigated to analyze the conversion phenomena. A sample prototype consisting of 20 × 20 unit cells was fabricated and measured, verifying our design and the simulated results. The proposed structure has potential applications in satellite communications, radar, stealth technologies, and reflector antennas.

The basic stealth technology techniques are often limited to single frequency bands or single functionality, presenting a challenge for achieving superior stealth performance. In this study, an optically transparent coding metasurface (OTCMS) is designed based on glass and indium tin oxide (ITO) to realize dual-polarization conversion along with radar cross section (RCS) reduction at different frequencies. The fundamental unit, “meta-0,” consists of a diagonal I-shaped ITO resistive pattern that converts linearly polarized incident wave into its orthogonal component in two frequency bands (9.46–11.63 GHz and 15.86–17.28 GHz) with a fractional bandwidths of 21% and 9% respectively, whereas linear polarized incident wave is converted to circular polarized reflected wave in the 12.50–15.26 GHz band, with a fractional bandwidth of 20%. Next, the Pancharatnam–Berry (PB) phase is utilized to generate “meta-1” by simply rotating the “meta-0” with 90° to achieve a 180° phase difference between them. The “meta-0” and “meta-1” are arranged in an array using an optimized coding sequence to form OTCMS for RCS reduction. A reduction of more than 10 dB in RCS has been achieved across dual frequency bands for linearly polarized incident wave from 8.9–11.6 and 15.9–17.7 GHz. A prototype has been fabricated, and experimental outcomes align well with simulated results. This work opens avenues for the development of multifunctional and low-profile devices for applications in stealth jet windows, optical communication, microwave screening and beyond.

Modern stealth application systems require integrated meta-devices to operate effectively and have gained significant attention recently. This research paper proposes a 1-bit coding metasurface (CM) design. The fundamental component of the proposed CM is integrated to convert linearly polarized incoming electromagnetic waves into their orthogonal counterpart within frequency bands of 12.37–13.03 GHz and 18.96–32.37 GHz, achieving a polarization conversion ratio exceeding 99%. Furthermore, it enables linear-to-circular polarization conversion from 11.80 to 12.29, 13.17 to 18.44, and 33.33 to 40.35 GHz. A second element is produced by rotating a fundamental component by 90°, introducing a phase difference of π (pi) between them. Both elements are arranged in an array using a random aperiodic coding sequence to create a 1-bit CM for reducing the radar cross-section (RCS). The planar structure achieved over 10 dB RCS reduction for polarized waves in the frequency bands of 13.1–13.8 GHz and 20.4–30.9 GHz. A prototype was fabricated and tested, with the experimental results showing a good agreement with the simulated outcomes. The proposed design holds potential applications in radar systems, reflector antennas, stealth technologies, and satellite communication.