Aceh is an important region for the production of high-quality Gayo arabica coffee in Indonesia. In this area, several coffee cherry processing methods are well implemented including the honey process (HP), wine process (WP), and natural process (NP). The most significant difference between the three coffee cherry processing methods is the fermentation process: HP is a process of pulped coffee bean fermentation, WP is coffee cherry fermentation, and NP is no fermentation. It is well known that the WP green coffee beans are better in quality and are sold at higher prices compared with the HP and NP green coffee beans. In this present study, we evaluated the utilization of fluorescence information to discriminate Gayo arabica green coffee beans from different cherry processing methods using portable fluorescence spectroscopy and chemometrics analysis. A total of 300 samples were used (n = 100 for HP, WP, and NP, respectively). Each sample consisted of three selected non-defective green coffee beans. Fluorescence spectral data from 348.5 nm to 866.5 nm were obtained by exciting the intact green coffee beans using a portable spectrometer equipped with four 365 nm LED lamps. The result showed that the fermented green coffee beans (HP and WP) were closely mapped and mostly clustered on the left side of PC1, with negative scores. The non-fermented (NP) green coffee beans were clustered mostly on the right of PC1 with positive scores. The results of the classification using partial least squares–discriminant analysis (PLS-DA), linear discriminant analysis (LDA), and principal component analysis–linear discriminant analysis (PCA-LDA) are acceptable, with an accuracy of more than 80% reported. The highest accuracy of prediction of 96.67% was obtained by using the PCA-LDA model. Our recent results show the potential application of portable fluorescence spectroscopy using LED lamps to classify and authenticate the Gayo arabica green coffee beans according to their different cherry processing methods. This innovative method is more affordable and could be easy to implement (in terms of both affordability and practicability) in the coffee industry in Indonesia.
Growth monitoring of plant is important especially to evaluate the influence of environment or growing condition on its productivity. One way to monitor the plant growth is by measuring the radial growth (i.e., the change of circumference) of certain part of plant such as trunk, branch, and fruit. In this study we develop an internet of things (IoT) based monitoring system of radial growth of plant using a low-cost optoelectronic sensor. The system was applied to monitor radial growth of guava fruits (Psidium guajava L.). The principle of the developed sensor is based on the optoelectronic sensor which detects alternating white and black narrow bar printed on reflective tapes. Reflective tape was installed encircling the fruit. The movement of reflective tapes will follow the radial growth of the fruit so that the infrared sensor on the optoelectronic would response reflective tapes movement. This device is designed to measure object continuously and long-term monitor with minimum maintenance. The data collected by the sensors are then sent to the server and also can be monitored in real-time. Based on field test, at current stage, the developed sensor could measure the radial growth of the fruits with a maximum error 2 mm. In term of data transfer, the success rate of the developed system was 97.54%. The result indicated that the developed system can be used as an effective tool for growth monitoring of plant.
High-quality Robusta peaberry coffees in Lampung underwent various processing techniques, including two distinct fermentation methods: Codot-based fermentation (CF) and natural-based fermentation (NF). The variation in fermentation techniques significantly affects the flavor and cost of Lampung's excellent Robusta peaberry coffees. This study examines the potential application of untargeted portable front-face fluorescence spectroscopy and chemometrics to differentiate Lampung fine Robusta peaberry coffees based on various fermentation procedures. Two varieties of green coffee beans were prepared for sampling: CF (n = 60) and NF (n = 60). Three kernels of green coffee beans from CF and NF were placed in a sample holder for each sample. The fluorescence spectral data were obtained using a portable front-face fluorescence spectrometer, including a 365 nm light-emitting diode (LED) as the excitation source. The creation of supervised classification models for CF and NF utilized three distinct classifiers: partial least squares-discriminant analysis (PLS-DA), principal component analysis-linear discriminant analysis (PCA-LDA), and linear discriminant analysis (LDA). The findings indicate that employing preprocessed spectral data yielded a classification accuracy of 100% (p < 0.01) across all classifiers. The current results affirm that assessing Lampung fine Robusta peaberry coffees utilizing various fermentation processes through low-cost front-face fluorescence spectroscopy is feasible.
AbstractCocoa bean from Indonesia may not be qualified enough caused by weevil pest interference. These days, fumigation is a solution to push down the weevil pest interference. However, anxious about health problem and environment pollution issue have judged the way to be unsafe mode. The aim of this research was to analyze the heating effect using microwave oven with various levels of power and time concerningthe mortality of warehouse pest Araecerus fasciculatus on cocoa bean, the reduction of water content, and the energy use during heating process. Input power of microwave oven was probed at 264, 400, and 600 watt, whereas the heating times were 60, 120, and 180 second with three times repetition. The mortality of warehouse pest Araecerus fasciculatus increased with raising the power level and time of heating process. Araecerus fasciculatus pest reached 100% of mortality at 600 watt of power level during 180 second with required energy of 99.72 kJ. The percentage of water content reduction in wet basis was 28.7%. Abstrak Kualitas biji kakao Indonesia masih tergolong rendah akibat adanya interferensi serangga hama. Fumigasi merupakan upaya yang selama ini dilakukan untuk menekan interferensi serangga hama. Namun, kekhawatiran akan kesehatan dan polusi lingkungan telah menyebabkan cara tersebut kurang baik. Tujuan penelitian ini adalah menganalisis pengaruh pemanasan dengan oven gelombang mikro dengan berbagai tingkat daya dan waktu terhadap mortalitas hama gudang Araecerus fasciculatus pada biji kakao dan penurunan kadar airnya serta penggunaan energi oven gelombang mikro selama proses pemanasan. Daya masukan oven gelombang mikro yang digunakan adalah 264, 400, dan 600 watt, sedangkan waktu pemanasan adalah 60, 120, dan 180 detik dengan tiga kali ulangan. Mortalitas hama gudang Araecerus fasciculatus mengalami peningkatan dengan meningkatnya tingkat daya dan waktu pemanasan. Hama Araecerus fasciculatus mencapai mortalitas 100% pada tingkat daya 600 watt selama 180 detik dengan penggunaan energi sebesar 99.72 kJ. Persentase penurunan kadar air basis basah pada tingkat daya dan waktu tersebut sebesar 28.7%.