This study evaluated the use of three solid brewery wastes: brewer's spent grain, hot trub and residual brewer's yeast, as alternative media for the cultivation of lactic acid bacteria to evaluate their potential for proteolytic enzyme production. Initially, a mixture experimental design was used to evaluate the effect of each residue, as well as different mixtures (with the protein content set at 4%) in the enzyme production. At predetermined intervals, the solid and liquid fractions were separated and the extracellular proteolytic activity was determined. After selecting the best experimental conditions, a second experiment, factorial experimental design, was developed in order to evaluate the protein content in the media (1 to 7%) and the addition of fermentable sugar (glucose, 1 to 7%). Among the wastes, residual yeast showed the highest potential for the production of extracellular enzymes, generating a proteolytic extract with 2.6 U/mL in 3 h. However, due to the low content of the fermentable sugars in the medium, the addition of glucose also had a positive effect, increasing the proteolytic activity to 4.9 U/mL. The best experimental conditions of each experimental design were reproduced for comparison, and the enzyme content was separated by ethanol precipitation. The best medium produced a precipitated protein with proteolytic activity of 145.5 U/g.
Beer is a fermented drink produced from a wort comprised of barley malt, hops, and water in combination with activity from the yeast strains of the genus Saccharomyces. The beverage is consumed around the world and has a global market controlled by several multinational companies. However, in recent years, it has been possible to note an increase in the number of microbreweries and homebrewers, necessitating additional research both to develop and increase competitiveness of this market sector as well as to improve product quality and promote the reduction of production costs. The process of milling barley malt is often not considered relevant to these goals; however, this operation is influential with regard to, for example, mashing yield, the concentration of polyphenols in beer, and the quality of wort clarification. Therefore, this work evaluates the wet (10%, 20%, 30%, 40%, and 50% moisture content) and dry barley malt milling process as well as analyzes particle size distribution and the mean diameter of particles. The milled grains were submitted to a mashing process to evaluate how particle size contributes to the conversion of starch to sugars and the availability of polyphenols on sweet wort. The results indicate the best milling conditions to obtain a good mashing yield while preserving as much malt husk as possible to facilitate wort clarification.
21 November 2017 in MOJ Food Processing & Technology
Beer is the most consumed alcoholic beverage in the world. In order to reduce processing time and meet the fast market demand, several measures are taken by the breweries, such as exogenous enzymes supplementation and changes in the mash profile. The present study aims to evaluate the effect of proteolytic step suppression and the addition of exogenous proteases in mashing on wort and beer composition. For that, an experimental design was elaborated, which resulted in the production of four different worts and beers, with and without realization of the proteolytic step during the mashing, and with and without the addition of exogenous proteases. The brewer's worts were analyzed for the following parameters: °Plato, extract, total nitrogen and free amino nitrogen content. The amino acids cysteine, histidine, phenylalanine, lysine, tryptophan and arginine were quantified in sweet worts by capillary electrophoresis. The beers produced were analyzed for alcohol content, real extract, total nitrogen and free amino nitrogen content, fermentation efficiency and the mass of coagulable matter. The addition of proteolytic extract promoted higher fermentation efficiency and an increase of the extract, as well as the contents of amino acids and total nitrogen in the sweet wort.
The partial substitution of barley malt has been one of the main strategies of breweries to reduce production costs. In Brazil, as in other countries, maize is a raw material that is used mostly for this purpose. Aiming for strategic cost management, some large breweries have adopted a reduction in the time and energy costs of the process. As an example, changes have been made to the traditional mashing curves by reducing the times or omitting the proteolytic step. The objective of this work was to compare the physical and chemical aspects of sweet and bitter worts prepared through experimental design with and without the addition of maize as adjunct, as well as the execution or not of the proteolytic step in mashing. Color, total acidity, extract, total reducing sugars, total phenolic compounds, and proteins content were evaluated. In addition, the antioxidant activity was determined. The wort obtained with maize and not submitted to the proteolytic step presented a bright color as well as reduced phenolic compounds, protein, and antioxidant activity. Comparatively, the action of proteases in the wort resulted in a greater release of total reducing sugars, a more intense color, and a higher content of total nitrogen and phenolic compounds. The results indicate that despite being an alternative to reduce costs in the brewing process, the use of the adjunct and the exclusion of the proteolytic step of mashing will imply a poor wort in regards to nutrition, which can compromise the activity of the yeast during the process and therefore affect the quality of the final product.