Beer is a fermented drink produced from a wort comprised of barley malt, hops, and water in combination with activity from the yeast strains of the genus Saccharomyces. The beverage is consumed around the world and has a global market controlled by several multinational companies. However, in recent years, it has been possible to note an increase in the number of microbreweries and homebrewers, necessitating additional research both to develop and increase competitiveness of this market sector as well as to improve product quality and promote the reduction of production costs. The process of milling barley malt is often not considered relevant to these goals; however, this operation is influential with regard to, for example, mashing yield, the concentration of polyphenols in beer, and the quality of wort clarification. Therefore, this work evaluates the wet (10%, 20%, 30%, 40%, and 50% moisture content) and dry barley malt milling process as well as analyzes particle size distribution and the mean diameter of particles. The milled grains were submitted to a mashing process to evaluate how particle size contributes to the conversion of starch to sugars and the availability of polyphenols on sweet wort. The results indicate the best milling conditions to obtain a good mashing yield while preserving as much malt husk as possible to facilitate wort clarification.
A hydrometallurgical process applicable to printed circuit boards of small electrical and electronic devices was developed. This involved three leaching steps (60 ºC, 2 h): 6 mol L-1 NaOH, 6 mol L-1 HCl and aqua regia. NaOH removed the resin and flame retardant that covered the circuit boards. HCl dissolved the most electropositive metals and a small amount of copper (~0.3 wt%). Aqua regia dissolved the noble metals. Silver precipitated as AgCl. Gold and platinum were quantitatively extracted with pure methyl-isobutylketone and Alamine 336 (10 % vol. in kerosene), respectively. Slow evaporation of the raffinate crystallized CuCl2.4H2O (89% yield)