The daily use of devices generating electric and magnetic fields has led to potential human overexposure in home and work environments. This paper assesses the possible effects of electric fields on human health at low and high frequencies. It presents an electronic monitoring device that captures the incidence of specific absorption rate (SAR) and temperature variation (∆T) on the human body. The system transmits data to a cloud platform, where a feedforward neural network (FFNN) processes the received information. SAR and surface temperature values are detected in an indoor environment, monitoring stationary and moving subjects. The results effectively assess temperature distribution due to electromagnetic fields. The prototype detected temperature peaks and high SAR values when the subjects remained motionless. Predictive analysis confirms the need for workplaces with materials shielding external electromagnetic signals and attenuating internal sources. Moderate mobile phone use could lower SAR and temperature values.

Defects in printed circuit boards (PCBs), if not detected promptly, may persist over time until they cause the failure of critical components. Traditional monitoring methods, which are limited to simulations or superficial measurements, obstruct predictive maintenance and real-time fault detection. To address these issues and enhance real-time diagnostics of thermal anomalies in PCBs, this work proposes an integrated system that combines infrared thermography (IRT), artificial intelligence (AI) algorithms, and Taguchi–ANOVA statistical techniques. IR thermography was employed to identify thermal stresses in the devices during normal operation. The IR acquisitions were used to build a dataset for specialized AI model’s training, which combines thermal anomalies segmentation using U-Net with a Multilayer Perceptron (MLP) classifier for heat distribution patterns. The Taguchi method determines the optimal configuration of the selected parameters, while Analysis of Variance (ANOVA) evaluates the effect of each factor on the F1-score response. These techniques statistically validated the AI performance, confirming the optimal set of selected hyperparameters and quantifying their contribution to F1-score. The novelty of the study lies in the integration of real-time infrared thermography with an interpretable AI pipeline and a Taguchi–ANOVA statistical framework, which enables both optimisation and rigorous validation of AI performance under real-time operating conditions.

Computed tomography (CT), magnetic resonance imaging (MRI), and radiography expose patients to electromagnetic fields (EMFs) and ionizing radiation. As an alternative, Electrical Impedance Tomography (EIT) offers a less EMF-influenced method for imaging by measuring superficial skin currents to provide a map of the body’s conductivity. EIT allows for functional monitoring of anatomical regions using low electromagnetic fields and minimal exposure times. This paper investigates the application of EIT for the morphological and functional assessment of tissues. Using the Finite Element Method (FEM) (Comsol 5.2), both two-dimensional and three-dimensional models and simulations of physiological and pathological tissues were developed to replicate EIT operations. The primary objective is to detect carcinoma by analysing the electrical impedance response to externally applied excitations. An eight-electrode tomograph was utilised for this purpose, specifically targeting epithelial tissue. The study allowed the characterisation of tomographs of any size and, therefore, the possibility to verify both their geometric profile and the ideal value of the excitation current to be delivered per second of the type of tissue to be analysed. Simulations were conducted to observe electrical impedance variations within a homogeneously modelled tissue and a carcinoma characterized by regular geometry. The outcomes demonstrated the potential of EIT as a viable technique for carcinoma detection, emphasizing its utility in medical diagnostics with reduced EMF exposure.

During a flight, the steel plate attack wing–fuselage of an aircraft is subjected to cyclical thermal stress caused by flight altitude variation that could compromise the functionality of the plate. Thus, it is compulsory after a sequence of flights to evaluate the state of plate health. In this work, we propose a new dynamic model on the basis of the physical transmission of heat by conduction governed by a second-order parabolic partial differential equation with suitable initial and boundary conditions to analyze and forecast thermal stresses in the plate of a P64 OSCAR B airplane. Developing this model in the COMSOL Multi-Physics^® environment, a finite-element technique was applied to achieve the thermal-stress map on the plate. The achieved results, equivalent to those obtained by a campaign of infrared thermographic experiment measurements (not yet used in the aeronautical industry), highlight the evolution of the thermal load of the steel plate attack wing–fuselage, adding evidence of possible incoming fatigue phenomena to identify in advance if the steel plate must be replaced.

In the context of urban sustainability and the development of resilient cities, the use of 4D geospatial data and the integration and association of building information with geographical information are of considerable interest. Achieving this integration is particularly significant in the scientific field from a technical standpoint but poses significant challenges due to the incompatibility between the two environments. This research proposes various methodologies for the effective integration of BIM/GIS data by analyzing their pros and cons and highlights the innovative aspects of the integration between these systems. Starting with the use of commercial software that has enabled the integration of a building’s 3D model within a GIS environment (this system is particularly useful for its ease of management and the potential for practical applications), this study progresses to an experimental virtual/augmented/mixed reality app developed by the authors that allows for the virtual integration of a building with its territorial context. It concludes with an innovative methodology that, by using the customizable and extensible libraries of the Cesium platform, facilitates the integration of structural data within a 4D geospatial space. This study demonstrates the feasibility of integrating BIM and GIS data despite inherent incompatibilities. The innovative use of Cesium platform libraries further enhances this integration, providing a comprehensive solution for intelligent and sustainable urban planning. By addressing the challenges of incompatibility, the final solution offers critical insights for a deeper understanding of evolving urban landscapes and for monitoring urban expansion and its environmental impacts.

Non-destructive testing (NDT) techniques are crucial in making informed decisions about reconstructing or repairing building structures. The SonReb method, a combination of the rebound hammer (RH) and the ultrasonic pulse velocity (UPV) tests, is widely used for this purpose. To evaluate the compressive strength, $CS$, of the concrete under investigation, the ultrasonic pulse velocity $V_p$ and the rebound index R must be mapped to the compressive strength $CS$ using a suitable conversion model, the identification of which requires supplementing the NDT measurements with destructive-type measurements (DT) on a relatively large number of concrete cores. An approach notably indicated in all cases where the minimization of the number of cores is essential is to employ a pre-existing conversion model, i.e., a model derived from previous studies conducted in the literature, which must be appropriately calibrated. In this paper, we investigate the performance of Gaussian process regression (GPR) in calibrating the pre-existing SonReb conversion models, exploiting their ability to handle nonlinearity and uncertainties. The numerical results obtained using experimental data collected from the literature show that GPR calibration is very effective, outperforming, in most cases, the standard multiplicative and additive techniques used to calibrate the SonReb models.