For short range optical transmissions, the intensity modulation and direct detection (IM/DD) offers the advantages of low cost and low complexity. In this paper, we will review our recent investigation results about IM/DD schemes such as polybinary and discrete multitone (DMT). Polybinary four-level pulse amplitude modulation (PAM-4) system shows better performance than the conventional PAM-4 system for both multimode and single-mode fibers. If the electrical dispersion compensation (EDC) is conducted with DDMZM, the reachable distance can be extended to 80 km which is suitable for the metro access scenario. Single sideband (SSB) polybinary-PAM-4 is also feasible to greatly increase the spectral efficiency (SE) and system capacity. Also, some DMT architectures for metro applications without using dispersion compensating modules will be introduced. SSB-DMT is very simple, while chromatic dispersion (CD) calculation and pre-compensation are not necessary. EDC double sideband (DSB) DMT owns 3-dB better performance than the SSB-DMT. CD can be calculated according to the power fading and the result is sent back to the transmitter for pre-compensation. Twin-SSB-DMT has the highest SE. More than 200-Gb/s data have been successfully generated and transmitted over 80 km single mode fiber (SMF).
29 January 2019 in IEEE Photonics Technology Letters
We propose a novel 7-level pulse amplitude modulation (PAM-7) combined with trellis coded modulation (TCM) for data center (DC) applications. Four symbols are combined in the 4-dimensional (4D) space to encode ten information bits. The novel scheme called 4D PAM-7 TCM is experimentally demonstrated with commercially available devices at 1550 nm at rates of 210/225 Gbit/s. Excellent performance is achieved by employing advanced DSP algorithms both at transmitter and receiver. The TCM scheme is compared with the PAM-6 modulation format that has the same spectral efficiency. The 4D PAM-7 TCM format improves sensitivity by 5.5 dB compared to the best PAM-6 results assuming that the system works with the KP4 FEC. The TCM solution may transport the next Ethernet data rate of 800G using 4×200G transceivers.